JVC LPT0762-001B - Manual (Page 14)

Filename [XVS20AG_06Index.fm]
Masterpage:Left+
14
EN
Page 14 April 24, 2003 3:47 pm
INSTALLING YOUR NEW UNIT (cont.)
Component Video Connection
(DVD deck only)
8To connect to a TV with COMPONENT VIDEO IN
connectors . . .
A
Connect the unit to TV.
A Connect the aerial, unit and TV as per “AV
Connection” or “S-VIDEO Connection”.
(
੬
pg. 12, 13)
B Connect the unit’s COMPONENT VIDEO OUT
connectors to the TV’s COMPONENT VIDEO IN
connectors.
C Connect the unit’s AUDIO OUT connectors to the TV’s
AUDIO IN connectors.
B
Connect the unit to mains.
Plug the end of the mains power cord into a mains outlet.
NOTES:
● You can obtain high-quality component video pictures.
● If your TV is not stereo-capable, use the unit’s AUDIO OUT
connectors to connect to an audio amplifier for Hi-Fi stereo
sound reproduction.
● For switching the TV’s mode, refer to the instruction manual of
your television.
ATTENTION
Be sure to connect the unit’s VIDEO OUT or S VIDEO OUT connector to the TV’s VIDEO IN or S-VIDEO IN
connector.
Back of TV
Aerial connector
COMPONENT VIDEO IN connector
AUDIO IN connectors
Component Video cable
(not provided)
Audio cable
(not provided)
Mains outlet
Mains power
cord
Back of unit
RF cable (provided)
AUDIO OUT
TV aerial
cable
COMPONENT
VIDEO OUT
After the connection is completed, perform “Video
Channel Set” on page 15.
XVS20AG_06Index.fm Page 14 Thursday, April 24, 2003 3:48 PM