JVC LPT0762-001B - Manual (Page 69)

Masterpage:Right-No-Heading
EN
69
Filename [XVS20AG_09Editing.fm]
Page 69 April 9, 2003 6:18 pm
Edit To Or From
Another Video
Recorder
You can use your unit as the source player or as the
recording deck.
A
Make connections.
A When using your unit as the source player ...
... connect its AUDIO/VIDEO OUT or AUDIO/S VIDEO
OUT connectors to the audio/video or audio/S-video
input connectors on another recorder.
B When using your unit as the recording deck ...
... connect its AUDIO/VIDEO IN or AUDIO/S VIDEO IN
connectors to the audio/video or audio/S-video output
connectors on another recorder.
B
Select the S-VHS deck.
On the unit
Press S-VHS/DVD repeatedly so that the S-VHS indicator
lights up.
On the remote control
Press S-VHS so that the S-VHS indicator lights up.
C
Set the input mode of recording deck.
With this video unit, press AUX (number key “0”) and/or
PR to select “L-1” for the AUDIO/VIDEO IN connectors,
or “S-1” for the AUDIO/S VIDEO IN connectors,
depending on the connector being used.
● When using another recorder as the recording deck, refer to its
instruction manual.
D
Set the edit mode.
See “PICTURE CONTROL” on page 77.
E
Start the source player.
Engage the Play mode of the source player.
F
Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step D, be sure to select
“AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish
dubbing the tapes.
● When you use this unit as the source player for editing, be sure to set
“O.S.D.” to “OFF” before starting. (
੬
pg. 78)
● It is also possible to use the front AUDIO/VIDEO or AUDIO/S-VIDEO
input connectors for the connection. When you use the front
connectors, select “F-1” for the AUDIO/VIDEO input connectors, “S-2”
for the AUDIO/S-VIDEO input connectors in step
C.
Advantages of S-VHS video recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.
● From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
● From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
● From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
A
B
Video
channel or
AV mode
Audio/video
cable
Recorder
Your unit
Another recorder
Player TV receiver
Audio/video cable
Video
channel or
AV mode
Your unit
Another recorder
Player
TV receiver
S-video cable
Recorder
Audio/video
cable
Audio/video cable
S-video
cable
Slide the TV/S-VHS/DVD switch to the right.
IMPORTANT
● To edit, both the player and the recorder must be of the same
colour system. Select the appropriate colour system. (
੬
pg. 77,
78)
● For more information on multi-system compatibility, refer to
“Information on Multi-System Compatibility (S-VHS deck only)”
(
੬
pg. 88)
XVS20AG_09Editing.fm Page 69 Wednesday, April 9, 2003 6:18 PM