Jabra FREEWAY - Manual (Page 13)

12
EN
G
LI
SH
JABRA FREEWAY
The Jabra FREEWAY is loaded with voice announcements that talks
you through setup and daily operation . In the table below you can
see the most common announcements .
Voice guidance
FREEWAY
announcements to you
What it means
“Welcome! You are now
ready for pairing . Go to
the Bluetooth menu on
your phone .
Turn on or enable
Bluetooth .
Search for devices and
select your Jabra hands
free device . Select pair
or OK . If asked for a PIN
code enter 0000”
The FREEWAY is in pairing mode .
Announced automatically when
powered on the first time and
whenever FREEWAY is put into
pairing mode .
”Pairing failed” Announced if pairing fails
“Connected” Announced when FREEWAY is
connected to a phone
“Two devices connected” Announced when FREEWAY is
connected to two phones/devices
”Disconnected” Announced if a connected phone/
device is turned off, goes out of
range or has BT disabled while in
range and while the speakerphone
is still turned on .
”Battery level is low” Announced when the battery level
goes below 10%
”Voice on/off” Announced when voice guidance
and controls are enabled or disabled
”Call from <name from
phone address book or
number>”*
Announced when there is an
incoming call if your phone/device
supports caller ID (PBAP)
* Phone dependent