Jabra FREEWAY - Manual (Page 7)

6
EN
G
LI
SH
JABRA FREEWAY
PAIRING IT WITH YOUR PHONE/DEVICE
Speakerphones are connected to mobile phones using a procedure
called ‘pairing’ . By following a few simple steps, a phone can be
paired with a speakerphone in a matter of seconds .
1 Activate Bluetooth® on your phone/device
2 Turn the Jabra FREEWAY on
3 The first time you turn the FREEWAY on it will automatically
enter into pairing mode . The Answer/end button will flash
with a blue light and you will be voice guided through the
pairing process . If you have disabled voice guidance go to the
Bluetooth® settings menu on your phone/device and search for
new Bluetooth® devices . Choose Jabra FREEWAY .
4 When pairing is complete you will hear ”Connected” . You are
now ready to start using your Jabra FREEWAY .
NOTE: If asked for a passkey or pin code use 0000 (four zeros)
CONNECTIVITY
SELECT
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
DEVICES FOUND
Jabra FREEWAY
Jabra FREEWAY
OK
Passkey:
****
HANDSFREE
SELECT
Jabra FREEWAY
added.
The handsfree is
now ready for use
SELECT
PAIR A NEW OR SECOND DEVICE
1 Ensure that the Jabra FREEWAY is turned on
2 Tap the Voice button . You will be asked to ”Say a command”
3 Say ”Pair new device” and follow the instructions
4 If this is your second device you will need to reconnect to the
first device afterwards