Jabra FREEWAY - Manual (Page 16)

15
EN
G
LI
SH
JABRA FREEWAY
Enable or disable
Voice Guidance and
commands
Press and hold the Voice button while
sliding the Power switch into the On
position . You will hear ”Voice on” when
you enable and ”Voice off” when you
disable the voice features .
Reset to factory
default
Turn on the FREEWAY and press and
hold the Answer/end, Voice and
Mute button together for about 6
seconds . When the FREEWAY is reset
it will automatically go into pairing
mode .
Night driving mode When powered on you can tap the
Vol- and Vol+ simultaneously to
disable the LED’s . And again to enable
them again . The LED’s will be enabled
every time you reconnect or power on
the FREEWAY .
Download Firmware updates and additional languages
Go to jabra .com/freeway and download the latest firmware and
additional languages .
TROUBLESHOOTING & FAQ
I hear crackling noises
- Bluetooth is a radio technology, which means it is sensitive to
objects between the speakerphone and the connected device .
It is designed for the speakerphone and the connected device
to be used within 33 feet (10 meters) of each other, with no
major objects in the way (walls, etc .) .
I cannot hear anything in my speakerphone
- Increase the volume in the speakerphone .
- Ensure that the speakerphone is paired to a device that is playing .
- Make sure your phone is connected to the speakerphone by
tapping the Answer/End button .