JVC KD-LH1101 - Manual (Page 30)

30
ENGLISH
Activating the level meter
You can show the level meters on the display
while playing any source. This unit is equipped
with three level meter patterns.
When shipped from the factory, level meter is set
to “Off.”
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step
1 again.
1
Press SEL (select) repeatedly.
Last selected level meter
appears on the display.
The next-step-operation
buttons start flashing.
• Each time you press the button, the
adjustable items change as follows:
• For SEL (Fad/Bal, Vol Adj) settings, see
page 27.
• For iEQ (sound mode) settings, see pages
28 and 29.
2
Select the level meter pattern you
want.
As you turn the control
dial, the level meters
change as follows:
Meter 1:
The audio level meter fluctuates vertically.
Meter 2:
The speaker on the display vibrates as input
audio level changes.
Meter 3:
The left and right audio level meters appear.
• If the small animation display is selected, only
one audio level meter can be shown.
Off 1
2 3
Canceled
Vol Adj Fad/Bal iEQ
METER
EN27-30KD-LH1101[E_EX]f.p65 2/26/03, 11:44 AM 30