JVC KD-LH1101 - Manual (Page 49)

49
ENGLISH
3
Start searching for an ensemble.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4
Select a service (either primary or
secondary) you want to listen to.
To tune in to a particular ensemble
without searching
Before you start....
Press FM/AM briefly if CD, CD changer, or
external component is the current source.
1 Press and hold FM/AM to select DAB tuner as
the source.
2 Press FM/AM repeatedly to select the DAB
band (DAB1, DAB2, or DAB3).
3 Press and hold ¢ or 4 for more
than one second.
4 Press ¢ or 4 repeatedly until the
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the button.
5 Press 5 (up) or ∞ (down) to select a service
(either primary or secondary) you want to
listen to.
To restore the FM/AM tuner
Press and hold FM/AM again.
To search for
ensembles of higher
frequency.
To search for ensembles of lower frequency.
To select the next service. (If a
primary service has some
secondary services, they are
selected before the next
primary service is selected.)
To select the previous service (either
primary or secondary).
Storing DAB services in
memory
You can preset up to 6 DAB services in each
DAB band (DAB1, DAB2, and DAB3) manually.
Before you start....
Press FM/AM briefly if CD, CD changer, or
external component is the current source.
1
Select the DAB tuner.
Each time you press and
hold the button, the DAB
tuner and the FM/AM tuner
are alternately selected.
2
Select the DAB band (DAB1, DAB2,
or DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
3
Tune in to an ensemble you want.
4
Select a service of the ensemble you
want to listen to.
FM/AM DAB
To select the next service.
To select the previous service.
DAB1 DAB2 DAB3
CONTINUED ON THE NEXT PAGE
EN48-52KD-LH1101[E_EX]f.p65 2/26/03, 11:46 AM 49