JVC KD-LH1101 - Manual (Page 47)

47
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparation:
For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
Before operating the external component,
select the external input correctly, follow the
procedure below.
• See also “Changing the general settings
(PSM)” on pages 31 and 32.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
2 Press number button 5 to select “AUDIO”—
Audio category of the PSM settings.
3 Press ¢ or 4 to select “Ext Input”*.
4 Turn the control dial clockwise to select
“Line In.”
5 Press SEL (select) to finish the setting.
• For details, see “To select the external
component to use—Ext Input” on page 34.
* Displayed only when one of the following sources is
selected—FM, AM, and CD.
Select the external component correctly,
follow the procedure below.
1
Select the external component
(Line In).
• If “Line In”* does not appear on the display,
see page 34 and select the external input
(“Line In”) in the “Ext Input” setting.
* Displayed only when one of the following sources is
selected—FM, AM, and CD.
Note on One-Touch Operation:
When you press CD/CD-CH, the power automatically
comes on. You do not have to press
to turn
on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics as
you want. (See pages 27 – 29.)
Note:
You can also change the display pattern by pressing
D (DISP) repeatedly.
CD Line In*
EN47-47KD-LH1101[E_EX]f.p65 2/26/03, 11:46 AM 47