JVC DR-MV4SUJ - Manual (Page 30)

Filename [MV4S_07Basic PlayRec.fm]
Masterpage:Left+
30
EN
BASIC RECORDING
Page 30Monday, 9 May 2005 09:37
1
Load a cassette with the record safety
tab intact.
● The unit’s power comes on automatically and the counter
is reset to 0:00:00.
2
Press VHS/DVD on the unit repeatedly
or VHS on the remote control so that
the VHS lamp lights up on the unit.
3
Press CH +/– or the number buttons to
select the channel you wish to record.
● If you record the programs received by cable box or DBS
receiver ...
1) Select “L-1” by pressing CH +/–.
2) Set the cable box or DBS receiver to the appropriate
channel.
4
Press REC MODE repeatedly to set the
recording mode.
5
Press 7 on the unit to start recording.
Or while holding 7, press 4 on the
remote control.
6
Press 9 to pause recording.
● You can select channel during the Record Pause mode.
● To resume recording, press 4.
7
Press 8 to stop recording.
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording (ITR) (
੬ pg. 59) or timer recording ( ੬ pg. 31),
the recording will resume automatically when power is
restored to the unit unless the unit’s memory backup has
expired.
Recording Mode
Basic Recording (VHS)
● Turn on the unit.
● Turn on the TV and select the AV mode.
Accidental erasure prevention
To prevent accidental recording on
a recorded cassette, remove its
safety tab. To record on it later,
cover the hole with adhesive tape.
VHS/DVD
DVD VHS REC
VHS DVD DUBBING
CH
STANDBY/ON
S-VIDEO VIDEO AUDIO
VHS lamp
Record safety tab
Recording
mode
Maximum
recording
time
(approx.)
Use
SP 2 hours
Select when the picture
quality is important.
EP 6 hours
Select when the time is
important. You can record 3
times longer than SP mode.
MV4S_07Basic PlayRec.fm Page 30 Monday, May 9, 2005 9:37 AM