JVC DR-MV4SUJ - Manual (Page 34)

Filename [MV4S_08Basic TimerDub.fm]
Masterpage:Left+
34
EN
TIMER RECORDING
Page 34Monday, 9 May 2005 09:38
Check, Cancel And Change Programs
1
When the DVD timer indicator lights on the front display
panel
Press TIMER #, then press 1.
When “ ” lights on the front display panel and the DVD
timer indicator also lights up on the front display panel.
Press 1.
When “R-LK” lights on the front display panel
Press REC LINK, then press 1.
2
Press PROG to access the Program Check screen, then press
rt w e to select “VHS PRGM CHECK” or “DVD PRGM CHECK”.
● To return to the previous screen after you check the program, press
PROG again.
To cancel the program
Press rt to select a program to be cancelled, then press
CANCEL.
3
Press rt to select the program, then press ENTER. The
program screen appears.
4
Change the settings of the desired recording options as
required.
● Refer to steps 5 – 10 in “Manual Timer Programing” ( ੬ pg. 31).
5
Press PROG to complete timer correction. The normal screen
resumes.
6
For Manual or On-Disc Timer Programing (DVD deck only)
Press TIMER #.
For Automatic Satellite Program Recording
Press REC LINK for 2 seconds or more.
● The DVD timer indicator also lights up on the front display panel and
the VHS deck is automatically selected. When the VHS deck is in
timer standby mode, the unit is automatically turned off.
NOTE:
When you check, cancel and change a On-Disc Timer Programing, be
sure to insert the On-Disc Timer programed disc.
When Programs Overlap Each Other
If “PROGRAM OVERLAPPED” appears, you have another
program overlapping the program you have just made.
Confirm with the arrow on “OK”, then press PROG. The Program
Check screen appears and conflicting programs will be highlighted
in pink.
Example: Program 3 (you have
just made) and program 4
overlap each other.
1
Confirm the overlapping
programs. Overlapping programs
appear on the TV screen.
NOTE:
If you do not mind this overlap,
press PROG to finish the timer
program setting. The program whose start time is earlier will be
recorded and the other one will not be recorded correctly.
2
Press rt to select the desired program to be cancelled or
changed.
● If program on the DVD deck and program on VHS deck overlap each
other, mark appears on the left of the date of each item. Press
rt w e to select “VHS PRGM CHECK” or “DVD PRGM CHECK”,
then select the program to be cancelled or changed.
To cancel the program
Press CANCEL.
● “THE TIMER PROGRAMING SETTING WAS CANCELLED” appears
on the TV screen for about 5 seconds, then the normal screen
resumes.
To change the program setting
Press ENTER, then go to step 3.
3
Change the program setting.
● Refer to steps 5 – 10 in “Manual Timer Programing” ( ੬ pg. 31).
4
Press PROG to check if the conflict has been settled. The
Program Check screen appears.
5
Engage the unit’s timer mode.
● Refer to step 6 in “Check, Cancel And Change Programs”
(
੬ pg. 34).
NOTE:
When any overlaps remain after deletion and modification of programs,
the Program Check screen remains showing the conflicting programs.
In such a case, repeat the procedure above until the conflict is solved.
ENTER
VHS
PROG
TIMER
DVD
CANCEL
REC LINK
Program’s information on the front display panel
You can check the details of the programs even when the power
is turned off. (it is necessary that the Power Save mode
(
੬ pg. 71) is disengaged or the unit is not in timer standby
mode.) However, it is not possible to cancel or change the
program’s setting.
A Press PROG.
● “NEW PROG” or “P-1” (if 8 programs have already been set)
appears.
B Press rt until the desired program number (“P-1” to “P-8”)
appears, then press ENTER.
C Press e.
● Each time you press e, the indication changes as follows (the
settings in parentheses are examples):
Date (“DATE 03.08SU”) ] Start time (“ON 11:00AM”) ] Stop time
(“OFF 11:30AM”) ] Channel (“CH 1”) ] Weekly/Daily (“MO-FR
DAILY”) ] Program number (“P-1”) and recording mode (“SP”) ]
(Back to the beginning)
D Press PROG to complete checking.
● The normal display resumes.
DATE
++++++++++++++++DVD NEW TIMER PROGRAM ++++++++++++++++
START CH DAILY/WEEKLY REC MODE
05/07 SAT 7:00PM - 8:00PM 44 WEEKLY SP
DISC TIMER PRGM
10/07 THU 10:00PM - 10:30PM 10 XP
11/07 FRI 08:00AM - 09:00AM 26 LP
STOP
SELECT WITH [CURSORS]
THEN PRESS [ENTER] OK
SELECT PROG
EXIT
11/07 FRI 08:30AM - 09:30AM 33 LP
DVD PRGM CHECK VHS PRGM CHECK
MV4S_08Basic TimerDub.fm Page 34 Monday, May 9, 2005 9:38 AM