JVC DR-MV4SUJ - Manual (Page 56)

Filename [MV4S_09Advanced Operation.fm]
Masterpage:Left+
56
EN
ADVANCED PLAYBACK
Page 56Monday, 9 May 2005 09:39
Next Function Memory
The Next Function Memory “tells” the unit what to do after
rewinding. Before continuing, make sure the unit is in the Stop
mode.
For Automatic Start Of Playback
Press 3, then press 4 within 2 seconds.
● Outside ring of disc marks blinks on the front display panel.
For Automatic Cassette Ejection
Press 3, then press x (EJECT) within 2 seconds.
● “ ” blinks on the front display panel.
Repeat Playback
Your unit can automatically play back the whole tape 100 times
repeatedly.
1
Press 4 to start playback.
2
Press and hold 4 for over 5 seconds, then release.
● “ ” lights up on the front display panel.
● After playing back a tape 100 times, the unit stops automatically.
3
Press 8 at any time to stop Repeat Playback.
● Pressing 4, 3, 5 or 9 also stops Repeat Playback.
Manual Tracking
Your unit is equipped with automatic tracking control. During
playback, you can override this and adjust the tracking manually by
pressing the CH buttons.
1
During playback, press CH + or – on the unit simultaneously to
activate manual tracking.
2
Press CH + or – to adjust the tracking manually.
● To return to automatic tracking, press CH + or – simultaneously or
eject and insert the tape again.
NOTE:
When a new tape is inserted, the unit enters the automatic tracking
mode automatically.
Soundtrack Selection
Your unit is capable of recording three soundtracks (L, R and
NORM) and will play back the one you select.
During Playback
Pressing AUDIO changes the soundtrack as follows:
NOTE:
“LR” should normally be selected. In this mode, Hi-Fi stereo tapes are
played back in stereo, and the normal audio track is played back
automatically for tapes with only normal audio.
VHS Progressive Scan
You can watch the images on VHS deck in the Progressive scan
mode via component video.
ATTENTION:
● Your TV needs to be compatible with Progressive and to have
Component video input connectors.
● Make sure that there is no disc in the unit.
1
Set the Progressive-compatible TV to the component input
mode.
2
Press DVD so that the DVD lamp lights up on the unit.
3
Press PROGRESSIVE SCAN for 3 or more seconds.
● The video output indicator lights up on the front display panel.
4
Press VHS so that the VHS lamp lights up on the unit, then
press PROGRESSIVE SCAN.
● “]” lights up on the unit.
NOTES:
● Be sure to engage the DVD deck in stop mode.
● During still picture in VHS Progressive Scan mode, the images may
jitter, but this is not a malfunction.
TRACK
USE
Front Display Panel
LR Hi-Fi sound is played back
L
Sound on the left Hi-Fi channel is
played back
R
Sound on the right Hi-Fi channel is
played back
NORM
Sound on the normal track is played
back
MIX
Both sounds on the Hi-Fi track and
normal track are mixed and played
back
VHS
MV4S_09Advanced Operation.fm Page 56 Monday, May 9, 2005 9:39 AM