JVC LET0227-003A - Manual (Page 13)

Basic operations
11
XV-C5SL/LET0227-003A/English
Ba
si
c
o
per
atio
ns
2
Press 5 / ∞ to select the desired
language.
You can select the on-screen language for the
preference displays, etc. from among ENGLISH,
FRENCH and GERMAN.
3
Press ENTER.
The second page is shown, in which the pull-down
menu of the [MONITOR TYPE] is already open.
4
Press
5
/
∞
to select the desired
monitor type.
For a normal (conventional) TV, select [4:3 LB] or
[4:3 PS].
For a wide-screen TV, select [16:9 NORMAL] or
[16:9 AUTO]. (See page 33)
5
Press ENTER.
The third page is shown, in which the pull-down
menu of the [DIGITAL AUDIO OUTPUT] is already
open.
6
Press
5
/
∞
to select a desired digital
output signal type.
Set this item correctly when you connect the unit to
an external surround decoder or D/A converter. (If
you do not connect the unit to such a device, you do
not have to set this item.)
• When connecting to a DTS, MPEG Multichannel,
and DOLBY Digital decoder, select [STREAM/
PCM].
• When connecting to a Dolby Digital decoder, select
[DOLBY DIGITAL/PCM].
• When connecting to other digital device, select
[PCM ONLY].
7
Press ENTER.
The TV screen returns to the opening display.
To bring up the DVD PLAYER SET UP display
later
Press CHOICE for a few seconds until the DVD PLAYER
SET UP display appears.
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
MONITOR TYPE 4:3 L.B.
PICTURE SOURCE AUTO
SCREEN SAVER ON
MP3/JPEG MP3
DVD PLAYER SET UP
16:9 NORMAL
16:9 AUTO
4:3 LB
4:3 PS
MONITOR TYPE options
SELECT
ENTER
USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
DIGITAL AUDIO OUTPUT DOLBY DIGITAL/PCM
ANALOG DOWN MIX DOLBY PROLOGIC
D RANGE CONTROL ON
OUTPUT LEVEL
DVD PLAYER SET UP
PCM ONLY
DOLBY DIGITAL/PCM
STREAM/PCM
DIGITAL AUDIO OUTPUT options
To change the brightness of the display
window
Press DIMMER on the remote control unit.
You can select the display window brightness from
three levels and off.
XV-C5SL(B).book Page 11 Friday, February 21, 2003 10:59 AM