JVC LET0227-003A - Manual (Page 37)

Changing the initial settings
35
XV-C5SL/LET0227-003A/English
Ch
ang
ing
th
e
initial
settings
D. RANGE CONTROL
This setting provides optimal audio quality from the
analog AUDIO OUT terminals for listening to DVD
VIDEO discs recorded in Dolby Digital format, at low or
middle volume.
Setting options
WIDE RANGE, NORMAL, TV MODE
[WIDE RANGE]: when selected, audio is played back
with the widest dynamic range so that you can enjoy
powerful playback sound.
[NORMAL]: normally, select this option.
[TV MODE]: select if DVD VIDEO disc sound level is
lower than TV program sound level. Thus you can hear
sound at a lower volume clearly.
OUTPUT LEVEL
This setting allows you to attenuate the level of the signal
output from the unit’s analog AUDIO OUT terminals.
Setting options
STANDARD, LOW
[STANDARD]: normally, select this option.
[LOW]: select if the sound output from the speaker is
distorted.
OTHERS menu
RESUME
You can select the resume playback mode.
See pages 13 and 14 for details about the resume
playback function.
Setting options
ON, OFF, DISC RESUME
[ON]: when selected, the unit can resume playback of
the disc from the position where playback was last
interrupted, if the disc is still in the disc slot.
[OFF]: when selected, the resume function is
deactivated.
[DISC RESUME]: when selected, the unit can resume
playback of the last 30 discs played. The unit retains a
memory of the interrupted positions of the last 30 discs
played, even though they have been removed from the
disc slot.
ON SCREEN GUIDE
The unit can display “on-screen guide” icons or
characters on the picture, which show what is happening
to the disc or the unit.
Example of “on-screen guide” icons: , ,
See page 13.
Setting options
ON, OFF
[ON]: when selected, the on-screen guide is activated.
AUTO STANDBY
When the unit is stopped for more than 30 minutes or 60
minutes, the unit enters standby mode automatically.
Setting options
60, 30, OFF
[60]: when selected, the unit enters standby mode
automatically after 60 minutes.
[30]: when selected, the unit enters standby mode
automatically after 30 minutes.
[OFF]: when selected, the unit does not enter standby
mode automatically.
AV COMPULINK MODE
This item is provided for use in the future. Leave it as the
default setting (“DVD 1”).
PARENTAL LOCK
When this option is selected, pressing ENTER on the
remote control unit brings up the PARENTAL LOCK
display shown below. This allows you to restrict children
from playing DVD VIDEO discs.
• See following pages for details about the parental lock
setting.
SELECT
ENTER
USE 5∞ TO SELECT, USE ENTER TO CONFIRM
TO EXIT, PRESS CHOICE.
SET LEVEL NONE
PASSWORD _ _ _ _
PARENTAL LOCK
EXIT
COUNTRY CODE GB
XV-C5SL(B).book Page 35 Friday, February 21, 2003 10:59 AM