JVC LET0227-003A - Manual (Page 36)

Changing the initial settings
34
XV-C5SL/LET0227-003A/English
Ch
ang
in
g th
e
initial
se
ttings
[4:3 PS] (Pan Scan conversion): select when you
connect the unit to a normal (4:3) TV.
When playing back a DVD VIDEO disc recorded in
wide picture format, the picture is zoomed to fill the
screen vertically, and the left and right sides of the
image are chopped off.
Note, however, that the picture will be shown in the 4:3
LB mode even if you select the 4:3 PS mode
depending on the disc.
PICTURE SOURCE
This mode selects whether the content on the disc is
processed by field (video source) or by frame (film
source.) You can obtain optimal picture quality according
to the source type to be played back by selecting an
appropriate option. This setting is available for both the
interlaced mode and progressive scanning mode.
Setting options
VIDEO(NORMAL), VIDEO(ACTIVE), FILM, AUTO
[VIDEO(NORMAL)]: select when playing back a video
source disc with relatively a few movements.
[VIDEO(ACTIVE)]: select when playing back a video
source disc with relatively a lot of movements.
[FILM]: select when playing back a film source disc.
[AUTO]: select when playing back a disc containing both
video and film source materials.
The unit recognizes the picture type (film or video
source) of the current disc according to the disc
information. Normally, select this option.
SCREEN SAVER
You can set the screen saver function to ON or OFF.
(See page 13.)
Setting options
ON, OFF
MP3/JPEG
The unit can play MP3 and JPEG files recorded on a
CD-R/CD-RW disc. However, if a disc contains both MP3
and JPEG files, you can only play files of the type
selected in this menu item.
Setting options
MP3, JPEG
[MP3]: when selected, only MP3 files can be played
back.
[JPEG]: when selected, only JPEG files can be played
back.
AUDIO menu
DIGITAL AUDIO OUTPUT
To connect the unit’s digital output to an external device
equipped with a digital input, this item must be set
correctly.
See “Appendix C: Digital output signal chart” on page 43
for details about the relation between the setting and
output signals.
Setting options
PCM ONLY, DOLBY DIGITAL/PCM, STREAM/PCM
[PCM ONLY]: select when you connect the DIGITAL
OUT jack of the unit to the linear PCM digital input of
other audio equipment.
[DOLBY DIGITAL/PCM]: select when you connect the
digital input of a Dolby Digital decoder or an amplifier
with a built-in Dolby Digital decoder.
When this option is selected, playing back a disc
recorded by the MPEG Multichannel format outputs a
linear PCM digital signal.
[STREAM/PCM]: select when you connect the digital
input of an amplifier with a built-in DTS, MPEG
Multichannel or Dolby Digital decoder, or the stand-
alone unit of such a decoder.
• With some DVD VIDEO discs that are not fully copy-
protected, a 20 or 24 bit digital signal may be output.
• A signal recorded with the 96 kHz sampling frequency
is output from the DIGITAL OUT jack with the 48 kHz
sampling frequency.
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD disc with
DTS, use a DTS decoder to get correct signals from
your speakers.
• DTS-encoded signal is output only from the unit’s
DIGITAL OUT jacks.
• If the unit is not connected to audio equipment with a
DTS decoder, DTS-encoded signal output from the
DIGITAL OUT jacks is distorted.
ANALOG DOWN MIX
To correctly play the audio on a DVD VIDEO disc
recorded with surround multichannel audio, you must set
this item properly according to your audio system
configuration.
(This function does not work when the 3D PHONIC
function is activated.)
Setting options
DOLBY SURROUND, STEREO
[DOLBY SURROUND]: select when listening to
multichannel surround audio with the unit’s analog
AUDIO OUT terminals connected to a surround
decoder.
[STEREO]: select when listening to conventional two-
channel stereo audio with the unit’s AUDIO OUT
terminals connected to a stereo amplifier/receiver or
television set, or in case you want to record the audio
from a DVD VIDEO disc to MiniDisc, cassette, etc.
XV-C5SL(B).book Page 34 Friday, February 21, 2003 10:59 AM