Jensen Phase Linear SD1413 - Manual (Page 10)

CD PLAYER OPERATION
Insert CD
With the label surface facing up, gently insert
the disc into the CD slot (11) until the soft-
loading mechanism engages and pulls the disc
in. Disc play begins and “CDP PLAY” will
appear in the display. The track number and
elapsed time appear in the display.
Track Select
Track select features are used to quickly
access the beginning of a particular track when
a disc is in play. Press the >>| button (14) to
move forward or the |<< button (13) to move
backward on the disc to locate the desired
track. Track numbers will appear in the display
as they are accessed.
Press and hold the >>| or |<< button to fast
forward or fast reverse through a disc. During
either function, the elapsed time will appear on
the display. Release the button to resume CD
play.
Play/Pause
Press the play/pause button (19) to suspend
disc play. “S--PAUSE” will appear in the display.
Press the play/pause button again to resume
disc play. The “S--PAUSE” indication will
disappear from the display, and play will
resume from the pausing point.
Disc Intro Scan (INT)
During disc play, press the 2 INT button (20) to
play the first 10 seconds of each track on the
disc. “S--SCN” will appear in the display. When
the desired track is reached, press 2 INT again
to end the scan function and play the selected
track. “S--SCN” will disappear from the display.
The scan function will also be canceled when
activating the repeat or shuffle functions.
SD1413
1 9 10
8
5
16 27 6 4 3
2
14
25
13 17
19 22
20
21
23 24
18
15
11 12
7 LIFT
NOTE: The unit is designed for play of
standard 5” (12 cm.) compact discs only. Do
not attempt to use 3” (8 cm.) CD singles in
this unit, either with or without an adaptor,
as damage to the player and/or the disc may
occur. Such damage will not be covered by
the warranty on this product.
DISP
I D 3
8
AF
TA
PTY
SD1413
SERIES