Jensen Phase Linear SD1413 - Manual (Page 7)

SD1413
5
TUNER OPERATION
AM/FM Band Selector (BAND)
Press the BAND button (5) during radio play to
switch between three FM bands and one AM
band. “F1”, “F2”, “F3” or “AM” will appear in the
display to indicate the band currently selected.
Tuning
Automatic Tuning
Press the >>| button (14) to tune upward in
frequency and the |<< button (13) to tune
downward in frequency. The unit will
automatically stop at the next strong station. If
the Local mode is active, the radio will seek the
next strong local station when either button is
pressed.
Manual Tuning
Press the >>| (14) or |<< (13) button for more
than two seconds to select manual tuning
mode. “MANUAL” will appear in the display.
Press the Up or Down Tuning buttons to move
radio frequency up or down two digits at a time.
Press and hold the Up or Down Tuning buttons
to quickly advance to a certain frequency.
Release when the desired frequency is
reached. If tuning is not adjusted within five
seconds of entering manual tuning mode, the
radio will revert to automatic tuning and “AUTO”
will appear in the display.
SD1413
1 9 10
8
5
16 27 6 4 3
2
14
25
13 17
19 22
20
21
23 24
18
15
11 12
7 LIFT
DISP
I D 3
SERIES
AF
TA
PTY
CLASSICS,
Music Group Speech Group
M1 POP , ROCK NEWS, AFFAIRS, INFO
CULTURE, SCIENCE, VARIED
JAZZ, COUNTRY
EASY, LIGHT SPORT, EDUCATE, DRAMA
NATION, OLDIES SOCIAL, RELIGION, PHONE IN
FOLK TRAVEL, LEISURE, DOCUMENT
M2
M3
M4
M5
M6
WEATHER,FINANCE, CHILDREN
Button Number
PTY Button
Each time when this button is pressed, the PTY
mode will toggle in the following order:
PTY Music Group -> PTY Speech Group ->PTY Off
The current PTY code is displayed on the LCD,
use the 6 preset buttons to select the other
PTY code, the distribution of program type are
as follow:
When PTY code is selected, the radio will
search the band for the station that matches
the PTY code.