Jensen Phase Linear SD1413 - Manual (Page 9)

7
CLASSICS,
Music Group Speech Group
M1 POP , ROCK NEWS, AFFAIRS, INFO
CULTURE, SCIENCE, VARIED
JAZZ, COUNTRY
EASY, LIGHT SPORT, EDUCATE, DRAMA
NATION, OLDIES SOCIAL, RELIGION, PHONE IN
FOLK TRAVEL, LEISURE, DOCUMENT
M2
M3
M4
M5
M6
WEATHER,FINANCE, CHILDREN
Button Number
The current PTY code is displayed on the LCD,
use the 6 preset buttons to select the other
PTY code, the distribution of program type are
as follow:
When PTY code is selected, the radio will
search the band for the station that matches
the PTY code.
OVERVIEW OF THE RDS FUNCTION
Radio Data System (RDS) is a broadcasting
service that allows FM stations to send
additional digital information along with the
regular radio program signal. Your car stereo
offers you a variety of services. Here are just
a few:
- PI (Program identification)
It is a code that identified RDS stations;
it is unique for each station.
- PS (PROGRAM Service Name)
The name of current station, it is shown on the
display.
- AF (Alternative Frequencies List)
The list(s) of Alternative Frequencies give
contains TP information.
TA ALARM
The radio does not retune but beeps will come out.
- PI SOUND, PI MUTE
When the vehicle is crossing the area where two
stations with same AF but different PI code can be
received at the same time, the receiver will become
unstable, under this situation two modes can be
selected.
PI SOUND
The different PI sounds will be heard.
PI MUTE
Under the same situation, the radio will be muted.
- RETUNE L, RETUNE S
To determine the initial time of automatic TA Search
or PI Search.
RETUNE L 90 seconds
RETUNE S 30 seconds
- MASK PI, MASK ALL
“PI” is referred to “Different PI with same AF”.
During AF search, PI stations and non-RDS stations
with strong signal will be masked, in the latter case,
the non-RDS stations may cause interference,
resulting the real AF to be masked due to the
misjudgment of the radio under interference.
There are two options to handle this situation.
MASK PI to mask only the AF with different PI.
MASK ALL mask both PI and strong signal non-RDS
stations.
To determine how the beep sound is generated
when the keys are pressed.
BEEP 2ND Beeps only when the second function
of the dual function button is selected (long press).
BEEP ALL Beeps when any buttons is pressed.
BEEP OFF To disable the beep option.
- BEEPS 2ND,BEEP ALL ,BEEP OFF
- TP (Traffic Program)
If the tuned program carries Traffic
Announcement, the TP indicator will turn on.
- TA (Traffic Announcement)
When an actual traffic bulletin is on air, the TA
indicator will also turn on.
- PTY (Program Type Codes)
This code is used to designate the current
program material being broadcast. With this
feature, you can search the programs that match
the selected program type, which is chosen from
a specific list of types.
- CT (Clock Time)
This function permits to update the clock of the
receiver the nation from which the station is
broadcasting (from PI). It could happen that on
the display will be shown the wrong hour; this
happens because in Italy the Clock Time function
is not working yet.
Notes
Depending on the country or region, not all of
the RDS functions are available in Italy.
RDS may not work properly if the signal
strength is weak or if the station you are tuned
to is not transmitting RDS data.
PROGRAMMABLE OPTIONALS
To use this function keep press long SEL Button
for few seconds, each time you press this button
the mode will move and the functions will shown
information on the various transmitters
broadcasting the same program in the same
or adjacent reception area. If the main
frequency should get worse, the radio will
tune automatically to the strongest Alternative
frequency.
- TA SEEK, TA ALARM
To determine what action will the radio take if the
newly tuned station does not receive TP
information for 5 seconds.
on the display, turn the encoder volume knob up/
down to set the desires functions ,the function
states as following:
TA SEEK
The radio retunes to a different station which
SD1413
SERIES