JVC KD-LX555R - Manual (Page 7)

7
ENGLISH
LVT1008-001A [E/EX]
3
Adjust the volume.
4
Adjust the sound as you want (see
pages 29 and 30).
To drop the volume in a moment
Press SOURCE ATT for more than 1 second
while listening to any source. “ATT” rotates on
the display, and the volume level will drop in a
moment.
To resume the previous volume level, press the
button for more than 1 second again.
To turn off the power
Press and hold OFF 0 until “SEE YOU” appears
on the display.
• If you turn off the power while listening to a
disc, you can start disc playback from where
you have stopped next time you turn on the
power.
Note:
When you use this unit for the first time, set the built-
in clock correctly, see page 8.
Note on display illustrations:
Illustrations will differ from what appears if
“CLOCK DISP” is set to “CLOCK OFF.”
See page 32.
To increase the volume
To decrease the volume
Turning on the power
1
Turn on the power.
The display illuminates and the
control panel and control dial
come out.
2
Select the source.
Each time you press the button,
the source changes as follows:
= FM = DAB tuner* 1 = CD* 2
= CD changer* 1 (or External component* 3 )
= AM = (back to the beginning)
* 1 Without connecting the CD changer and/or
the DAB tuner, you cannot select it as the
source to play.
* 2 If a disc is not in the loading slot, you cannot
select “CD” as the source to play.
* 3 To select the external component, set the
“EXT INPUT” setting to “LINE INPUT.”
(See page 33.)
To operate the tuner (FM or AM),
see pages 9 – 11.
To play back a CD,
see pages 19 – 21.
To play back an MP3 disc,
see pages 24 – 28.
To operate the CD changer,
see pages 38 – 41.
To operate the external component,
see page 42.
To operate the DAB tuner,
see pages 43 – 46.
BASIC OPERATIONS
Volume level appears.
SOURCE
ATT
1
KD-LX555R SSM
10 7 8 9 11 12 OFF
S T D M
MODE BAND TP/PTY DISP SEL INT RPT RND MONO EQ ATT
SOURCE
2 3
EN07-08KD-LX555R[E]f.p65 02.12.25, 17:16 7