Johnson Controls IFC-640 User Manual

Page 2

Advertising
background image

Page 2 of 9 — JCI-6856:A • 12/01/06

Multi-detector algorithm involves nearby detectors in alarm
decision (U.S. Patent 5,627,515).

Automatic detector sensitivity testing.

Maintenance alert (two levels).

Self-optimizing pre-alarm.

VIEW® (VERY INTELLIGENT EARLY WARNING)
SMOKE DETECTION TECHNOLOGY:

Revolutionary spot laser design.

Advanced AWACS algorithms differentiate between smoke
and non-smoke signals (U.S. Patent 5,831,524).

Addressable operation pinpoints the fire location.

No moving parts to fail or filters to change.

Early warning performance comparable to the best aspiration
systems at a fraction of the lifetime cost.

ACCLIMATE
LOW-PROFILE INTELLIGENT MULTI-SENSOR:

Detector automatically adjusts sensitivity levels without oper-
ator intervention or programming. Sensitivity increases with
heat.

Microprocessor-based technology; combination photo and
thermal technology.

FlashScan® or classic mode compatible with IFC-640.

Low-temperature warning signal at 40°F ± 5°F (4.44°C ±
2.77°C).

RFX WIRELESS INTERFACE SYSTEM:

Allows protection in areas where the use of wire is uneco-
nomical or unpractical.

Allows communication with wireless smoke detectors and
wireless monitor modules; each RFX unit and detector is
assigned an address.

Requires 24 VDC from SLC or system auxiliary power.

HARSH™ HOSTILE-AREA SMOKE HEAD:

Provides early warning of smoke detection in environment
where traditional smoke detectors are not practical.

The detector's filters remove particulates down to 30 microns
in size.

Intake fan draws air into photo chamber, while airborne parti-
cles and water mist are removed.

Requires auxiliary 24 VDC from system or remote power
supply.

RELEASING FEATURES:

Ten independent hazards.

Sophisticated cross-zone (three options).

Delay timer and Discharge timers (adjustable).

Abort (four options).

Low-pressure CO

2

listed.

VOICE AND TELEPHONE FEATURES:

Solid state message generation.

Hard-wired voice control module options.

Firefighter telephone option.

30- to 120-watt high-efficiency amplifiers (AA Series).

Backup tone generator and amplifier option.

Multichannel voice transponder (XPIQ).

HIGH-EFFICIENCY OFFLINE SWITCHING
3.0 AMP POWER SUPPLY (6.0 A IN ALARM):

120 or 220/240 VAC.

Displays battery current/voltage on panel (with display).

Sample

System

Options

Advertising