Johnson Controls IFC-640 User Manual

Page 7

Advertising
background image

JCI-6856:A • 12/01/06 — Page 7 of 9

LDM: Lamp Driver Modules LDM-32, LDM-E32, and LDM-R32.
See LDM technical bulletin.

ACM-8R: Remote Relay Module with eight Form-C contacts.
Can be located up to 6,000 ft. (1828.8 m) from panel on four
wires. See ACM-8R technical bulletin.

SCS: Smoke control station; eight (expandable to 16) circuits.
See SCS technical bulletin.

RPT-485: Repeats EIA-485 over twisted pair or converts to
fiber-optic medium. See RPT technical bulletin.

XP5: The XP5-M and XP5-C provide FlashScan® transponder
points. See XP5 technical bulletin.

XP: The XP Series Transponder provides conventional monitor
and control points (CLIP mode only). See XP Series technical
bulletin.

XPIQ: The XPIQ quad intelligent voice transponder for distrib-
uted multichannel voice evacuation systems, an integrated
audio amplification and distribution subsystem controlled by
FACP. Capable of playing up to four simultaneous messages.
Accepts up to four 25-watt amplifiers. See XPIQ technical bulle-
tin.

CHS-4: Chassis for mounting up to four APS-6Rs.

CHS-4L: Low-profile four-position Chassis. Mounts two AA-30
amplifiers or one AMG-E and one AA-30.

DP-1B: Blank Dress panel. Provides dead-front panel for
unused tiers or to cover AA-30, AA-120, or one AMG-E and one
AA-30.

CAB-4 Series: The CAB-4 Series cabinets are fabricated from
16-gauge steel. The cabinet assembly consists of two basic
parts: a Backbox (SBB-_4), and a Locking Door (DR-_4) that
may hinge right or left. Cabinets are available in four sizes, “A”
through “D”, with one to four tiers. A trim ring option is available
for semi-flush mounting. See CAB-4 Series technical bulletin.

COMPATIBLE DEVICES, EIA-232 PORTS

JPRN-5: 80-column printer.

JPRN-6: 80-column printer.

VS4095/S2: Printer, 40-column, 24 V. Mounted in external
backbox. Order from Keltron, Inc.

CRT-2: Video display terminal.

COMPATIBLE DEVICES, EIA-485 PORTS

ACS Series: Remote serial annunciator/control systems.

FDU-80: Remote LCD display, 80 characters, with LEDs.

LCD-80: Remote LCD display, 80 characters.

LCD-80TM: Remote LCD display, 80 characters, terminal
mode.

LDM Series: Remote custom graphic driver modules.

ACM-8R: Remote relay module. 8 Form-C relays.

RPT-485 Series: Repeater, isolator and/or fiber-optic modem.

UDACT: Universal Digital Alarm Communicator Transmitter,
636 channel.

UZC-256: Zone Coder. Up to 256 programmable codes.

COMPATIBLE INTELLIGENT DEVICES

BEAMHK: Heating kit for transmitter/receiver unit of FSB-
200(S) below.

BEAMHRK: Heating kit for use with the reflector of FSB-200(S)
below.

BEAMLRK: Long-range accessory kit, FSB-200(S) below.

BEAMMRK: Multi-mount kit, FSB-200(S) below.

BEAMSMK: Surface-mount kit, FSB-200(S) below.

FSB-200: Intelligent beam smoke detector.

FSB-200S: Intelligent beam smoke detector with integral sensi-
tivity test.

1951J: Low-profile FlashScan® ionization detector, will replace
1351J.

1351J: Low-profile FlashScan® ionization detector.

2951J: Low-profile FlashScan® photoelectric detector, will
replace 2351J.

2351J: Low-profile FlashScan® photoelectric detector.

2951TJ: Low-profile FlashScan® photoelectric detector with
135°F (57°C) thermal, will replace 2351TJ.

2351TJ: Low-profile FlashScan® photoelectric detector with
135°F (57°C) thermal.

5951J: FlashScan® thermal detector 135°F (57°C), will replace
5351J.

5351J: FlashScan® thermal detector 135°F (57°C).

5951RJ: FlashScan® thermal detector 135°F (57°C) with rate-
of-rise, will replace 5351RJ.

5351RJ: FlashScan® thermal detector 135°F (57°C) with rate-
of-rise.

5951HJ: FlashScan® 190°F (88°C) high-temperature thermal
detector.

DH300PL: Low-flow FlashScan® photo duct detector with
housing.

DH300RPL: Low-flow FlashScan® photo duct detector with
relay and housing.

2951TMJ: FlashScan® Acclimate low-profile multi-sensor
detector.

FTX-P2J: FlashScan® HARSH™ Hostile Area Smoke Head.

7351J: FlashScan® VIEW® laser photo detector, will replace
7251J.

7251J: Low-profile VIEW® laser photo detector.

B224RB: Low-profile relay base.

B224BI: Isolator base for low-profile detectors.

B210LPJ: Low-profile base. Standard U.S. style.

B501J: European-style, 4" (10.16 cm) base.

B501BH: Sounder base, includes B501J base above. Constant
tone.

B501BHT: Sounder base, includes B501J base above. Tempo-
ral three tone.

M300MJ: FlashScan® monitor module.

M300DJ: FlashScan® dual monitor module.

M302MJ: FlashScan® two-wire detector monitor module.

M301MJ: FlashScan® miniature monitor module.

M300CJ: FlashScan® NAC control module.

M300RJ: FlashScan® relay module.

M300SMJ: FlashScan® pull station monitor module.

JBG-12LX: Manual fire alarm station, addressable.

M500XJ: Isolator module.

XP6-C: FlashScan® six-circuit supervised control module.

XP6-MA: FlashScan® six-zone interface module; connects
intelligent alarm system to two-wire conventional detection
zone.

XP6-R: FlashScan® six-relay (Form-C) control module.

XP10-M: FlashScan® ten-input monitor module.

XPIQ: Intelligent quad transponder.

OTHER OPTIONS

DPI-232: Direct Panel Interface, specialized modem for extend-
ing serial data links to remotely located FACPs and/or peripher-
als.

LEM-320: Loop Expander Module. Expands each 640 to two
Signaling Line Circuits.

Advertising