Johnson Controls IFC-640 - Manual (Page 8)

Page 8 of 9 — JCI-6856:A • 12/01/06
TM-4: Transmitter Module. Includes three reverse-polarity cir-
cuits and one municipal box circuit. Mounts in panel module
position (single-address-style) or in CHS-M2 position.
NCM-W: Network Communications Module, Wire. Order one
NCM per network node (JCPU-640 or JNCA).
NCM-F: Network Communications Module, Fiber. Order one
NCM per network node (JCPU-640 or JNCA).
IFW-W: Intelligent Fire Workstation (network control station),
Wire. UL-Listed graphics PC with mouse, 17" color flat-screen
LCD monitor. Order as necessary for network systems. Each
IFW consumes one of 103 network addresses.
IFW-F: Intelligent Fire Workstation (network control station),
Fiber. UL-Listed graphics PC with mouse, 17" color flat-screen
LCD monitor. Order as necessary for network systems. Each
IFW consumes one of 103 network addresses.
JVeriFire-TCD: VeriFire® Tools CD-ROM. Contains program-
ming software for the IFC-640, JNCA, and XPIQ. Includes local
panel connection cable. Programming PC requires a serial port
connection.
ACM-24AT: ACS annunciator – up to 96 points of annunciation
with Alarm or Active LED, Trouble LED, and switch per circuit.
Active/Alarm LEDs can be programmed (by powered-up switch
selection) by point to be red, green, or yellow; the Trouble LED is
always yellow.
AEM-24AT: Same LED and switch capabilities as ACM-24AT,
expands the ACM-24AT to 48, 72, or 96 points.
ACM-48A: ACS annunciator – up to 96 points of annunciation
with Alarm or Active LED per circuit. Active/Alarm LEDs can be
programmed (by powered-up switch selection) in groups of 24 to
be red, green, or yellow. Expandable to 96 points with one AEM-
48A.
AEM-48A: Same LED capabilities as ACM-48A, expands the
ACM-48A to 96 points.
BAT Series: Batteries. IFC-640 utilizes two 12 volt, 12 to 55 AH
batteries. See DN-6933.
PS Series: Batteries. IFC-640 utilizes two 12 volt, 12 to 55 AH
batteries.
JCI-LBB: Battery Box (required for batteries over 25 AH).