JVC XV-D701BK User Manual
Page 29
25
Getting started
Getting started
XV-D701BK [C] EN
LET0141-002A
English
Français
To use the remote control unit for CATV converter or
satellite tuner operation
You can operate the CATV converter or satellite tuner with the remote control
unit. To operate them, you have to change the remote control signal. Also refer
to the manual supplied with them.
Changing the remote control signal
1
Set
CATV
TV
DVD
on the remote control unit to CATV.
2
Press and hold
CATV/SAT
POWER
, then press
SET
.
Do not release
CATV/SAT
POWER
. Keep holding
CATV/SAT
POWER
until the next step is completed.
3
Holding
CATV/SAT
POWER
, enter the manufacturer’s code (two digits) using
0
to
9
.
See the lists on the right to find the manufacturer’s code.
4
Release
CATV/SAT
POWER
.
The following buttons can be used for operating the CATV converter or
satellite tuner (with
CATV
TV
DVD
set to CATV):
5
Try to operate he CATV converter or satellite tuner by pressing
CATV/SAT
POWER
.
If the CATV converter or satellite tuner turns on or off, you have entered the
correct code.
CATV/SAT
POWER
CH
+
–
0
to
9
Turns the CATV converter or satellite tuner on or off.
Changes the channels.
Selects the TV channels.
NOTE
¶
If there is more than one code listed for your brand of he CATV converter or
satellite tuner, try each one until the correct one is entered.
No.
Manufacturer
01
GI JERROLD
02
GI JERROLD
03
GI JERROLD
04
GI JERROLD
05
GI JERROLD
06
GI JERROLD
07
GI JERROLD
08
GI JERROLD
09
SCIENTIFIC ATRANTA
10
SCIENTIFIC ATRANTA
11
ZENITH
12
ZENITH
13
PIONEER
14
PIONEER
15
HAMLIN/REGAL
16
HAMLIN/REGAL
17
HAMLIN/REGAL
18
HAMLIN/REGAL
19
OAK/SIGMA
20
OAK/SIGMA
21
OAK/SIGMA
22
TOCOM
23
TOCOM
24
RCA/PANASONIC
25
RCA/PANASONIC
26
RCA/PANASONIC
27
RCA(SAT)
28
SONY(SAT)
Manufacturer’s code list