JVC KD-LHX501 EN - Manual (Page 14)

14
ENGLISH
Using PTY Standby Reception
PTY Standby Reception allows the unit to
switch temporarily to your favorite programme
(PTY: Programme Type) from any source other
than AM.
To select your favorite PTY code for PTY
Standby Reception
You can select your favorite programme type
for PTY Standby Reception.
• When shipped from factory, PTY Standby
Reception has been set to work for searching
for “News” programmes.
1
2
3
4
5
Select a PTY code (see page 17).
Exit
○ ○ ○ ○ ○ ○ ○ ○ ○
Using the Standby Reception
You can use two types of Standby Reception—
TA Standby Reception and PTY Standby
Reception.
Using TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA)
from any source other than AM.
• If a station starts broadcasting a traffic
announcement, “Traffic News” appears on
the display, and this unit temporarily tunes in
to the station. The volume changes to the
preset TA volume level (see page 37).
To activate TA Standby Reception:
• If the TP indicator lights up, TA Standby
Reception is activated.
• If the TP indicator flashes, TA Standby
Reception is not yet activated. (This occurs
when you are listening to an FM station
without the RDS signals required for TA
Standby Reception).
To activate TA Standby Reception, tune in to
another station providing these signals.
When you tune in to such a station, the TP
indicator stops flashing and remains lit. Now
TA Standby Reception is activated.
To deactivate the TA Standby Reception:
TP indicator
(either lights up or flashes)
The TP indicator goes off.
Select “TUNER.”
Now “PTY Stnby” setting
appears.
The last selected item appears.
12-17_KD-LHX501_2_Ef.p65 2/11/04, 8:10 PM 14