JVC KD-LHX501 EN - Manual (Page 54)

54
ENGLISH
4
5
6
○ ○ ○ ○ ○ ○ ○ ○ ○
Using the Standby Reception
You can use three types of Standby Reception.
• Road Traffic News Standby Reception
• Announcement Standby Reception
• PTY Standby Reception
Using Road Traffic News Standby
Reception
Road Traffic News Standby Reception allows
the unit to switch temporarily to Road Traffic
News (or Traffic Announcement) from any
source except AM.
• If a Road Traffic News (or Traffic
Announcement) starts broadcasting, “Traffic
News” appears and the unit tunes into the
service (or FM RDS station) broadcasting
Road Traffic News (or Traffic
Announcement). The volume changes to the
preset TA volume level (see page 37).
To activate Road Traffic News Standby
Reception (and TA Standby Reception):
• If the TP indicator lights up, Road Traffic
News Standby Reception (or TA Standby
Reception) is activated.
– When a service which is supporting Road
Traffic News is received. This unit now
stands by for the Road Traffic News signal
reception—Road Traffic News Standby
Reception.
– When a service which is not supporting
Road Traffic News signal is received. This
unit now stands by for the TA signal
reception—TA Standby Reception (see
page 14).
• If the TP indicator flashes, Road Traffic News
Standby Reception is not yet activated.
To activate Road Traffic News Standby
Reception, tune in to another DAB service
supporting these signals.
When you tune in to such a service, the TP
indicator stops flashing and remains lit. Now
Road Traffic News Standby Reception is
activated.
To deactivate the Road Traffic News Standby
Reception (and TA Standby Reception):
TP indicator
(either lights up or flashes)
TP indicator goes off.
Change a service if necessary.
Select a preset number.
51-57_KD-LHX501_2_Ef.p65 2/11/04, 8:19 PM 54