JVC KD-LHX501 EN - Manual (Page 15)

15
ENGLISH
To activate PTY Standby Reception
• After activating PTY Standby Reception, you
can change the source without canceling PTY
Standby Reception (except to AM).
1
While listening to an FM station....
2
3
PTY code: Activates PTY Standby
Reception for the selected PTY
code.
Off: Cancels the Reception.
4
• If the PTY indicator lights up, PTY Standby
Reception is activated.
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
To activate PTY Standby Reception, tune in
to another station providing these signals.
When you tune in to such a station, the PTY
indicator stops flashing and remains lit. Now
PTY Standby Reception is activated.
PTY indicator
(either lights up or flashes)
○ ○ ○ ○ ○ ○ ○ ○ ○
Tracking the same programme—
○ ○ ○ ○ ○ ○ ○ ○ ○
Network-Tracking Reception
When driving in an area where FM reception is
not sufficient enough, this unit automatically
tunes in to another FM RDS station of the
same network, possibly broadcasting the same
programme with stronger signals.
• When shipped from the factory, Network-
Tracking Reception is activated with “AF (see
the next page)” selected.
To change the Network-Tracking Reception
setting, follow the procedure below:
1
2
Programme “A” on
Frequency “01”
“A” on “02”
“A” on “03”
“A” on “04”
“A” on “05”
To be continued...
PTY code
(News, Info, etc.)
Off
Exit
The last selected item appears.
12-17_KD-LHX501_2_Ef.p65 2/11/04, 8:10 PM 15