JVC KD-LHX501 EN - Manual (Page 9)

9
ENGLISH 3
Start searching for a station
“Auto Search” begins.
When a station is received, searching stops.
To stop searching, press the same icon.
To tune in to a station manually
In step
3
above...
○ ○ ○ ○ ○ ○ ○ ○
Listening to the radio
1
Select the Tuner
2
Select the band (FM/AM)
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
Main Menu
Tuner Mode Menu
Select “TUNER.”
Radio Operations
Main touch panels used in this section
• To return to the previous screen, press
“BACK” (if shown).
Activate “Manual
Search.” Select station
frequencies.
Hold
Appears only for FM.
You can also
change the
source by....
Then just wait.
Preset Station List* 1
Appears only for FM.
• Press to change the FM band (1
=2=3=...).
• Hold to change the FM band (3 =2=1=...).
* 1 The lists show either the station frequency or PS name (the first 8 characters, see page 11).
Tuner Operation screen
06-11_KD-LHX501_2_Ef.p65 2/11/04, 8:09 PM 9