JVC KW-NT3HD - Manual (Page 40)

40
ENGLISH
Navi Menu —Options
Menu items Selectable settings Initial: Underlined
Route
Priority Fastest, Shortest (
☞ page 29)
Freeway/ Toll Road/ Ferry
Use, Avoid (
☞ page 29)
Bypass Traffic
(Only for KW-NT3HDT)
Auto, Manual, Off (
☞ page 35)
Sound
Attention tone* Select the type of attention tone, coming out before the voice guidance by
pressing [
2] or [3].
Off, Normal, Prompt, A.I.
Guidance Volume* Adjust the volume of the voice guidance. (The adjustment does not affect
the audio volume.)
0 to 20; Initial 10
Output* Select the guidance output channel (for front channel only). (This setting
does not affect the output balance (Fader setting) of AV source.)
L ch., L+R ch., R ch.
Music Mix You can turn down the volume of the AV source while voice guidance is
produced.
Muting: The AV source sound does not come out.
Att.: The AV source sound is lowered.
Normal: The AV source sound is not affected.
Speed Alert The System sounds an alarm when you surpass the speed limit of the
current road by the set value. Press [+] or [−] to select the value. The unit
(“km/h” or “mph”) follows the <Scale unit> setting. (
☞ page 41)
Off, 3mph (5km/h), 6mph (10km/h), 10mph (15 km/h),
15mph (25km/h), 20mph (35km/h)
POI Alert Alert sounds when you approach within 0.2 mi (300 m) of a POI of the
selected category. (You can select any categories from the following; Gas
Station, Parking, Car Rental and Car Dealer & Service.)
• To select categories for POI alert, press [Edit], then select categories and
sub-categories (the selected items are marked with “
✔”). To activate
POI alert for selected categories, press [On]. To deactivate it, press [Off].
* When adjusting these items, test tone is produced.
Navigation menu items
Switches the category by pressing the corresponding tab
EN_KW-NT3[J]f.indb 40 EN_KW-NT3[J]f.indb 40 10.4.2 0:57:07 PM 10.4.2 0:57:07 PM