JVC KW-NT3HD - Manual (Page 75)

ENGLISH
75
Using Bluetooth device
To connect a Bluetooth device for the
first time
When you connect a Bluetooth device to the unit
for the first time, make pairing between the unit
and the device. Pairing allows Bluetooth devices to
communicate each other.
• Once you register a Bluetooth device, the device
remains registered until the registration is deleted.
(
☞ page 76)
• Up to 5 devices can be registered in total.
• Only one device for Bluetooth phone and one for
Bluetooth audio can be connected at a time.
• To use the Bluetooth function, you need to turn on
Bluetooth function of the device.
1
Operate the Bluetooth device to turn on its
Bluetooth function.
2
Display the Bluetooth setting screen.
For connecting a Bluetooth mobile phone
<Phone Settings> is displayed.
Registering a Bluetooth device
PIN code (initial: 0000)
For connecting a Bluetooth audio player
• To activate “BT Audio” for source selection,
☞
page 71 (<Bluetooth Audio>).
<Mode> is displayed.
3
Change the PIN code.
• If you skip changing PIN code, go to step 4.
4
Continued on the next page
Press: Deletes last character
Hold: Deletes all characters
EN_KW-NT3[J]f.indb 75 EN_KW-NT3[J]f.indb 75 10.4.2 0:57:49 PM 10.4.2 0:57:49 PM