JVC KW-NT3HD - Manual (Page 71)

ENGLISH
71
Menu items Selectable settings Initial: Underlined
Input
AV Input You can determine the use of the LINE IN and VIDEO IN jacks.
(
☞ page 65)
AV: Select when connecting an AV component such as a camcorder.
Audio: Select when connecting an audio component such as a portable
audio player.
Off * 1 : Select when no component is connected (“AV-IN” is not
selectable).
Bluetooth Audio On: Activates “BT Audio” for source selection.
Off *
1 : Deactivates “BT Audio” for source selection (“BT Audio” is not
selectable).
Camera Input * 2 On, Off (
☞ page 83)
Reverse Signal Polarity * 2 Battery, GND (
☞ page 9)
System
Language Select the language used for on-screen information and voice guidance.
English, Español, Français
Time Format 12 Hours, 24 Hours
Time Zone * 2 Select your residential area from one of the following time zones for
clock adjustment.
Hawaii (UTC–10:00), Alaska (UTC–09:00), Pacific (UTC–08:00),
Mountain (UTC–07:00), Central (UTC–06:00),
Eastern (UTC–05:00), Atlantic (UTC–04:00),
Newfoundland (UTC–03:30)
DST (Daylight Saving Time) * 2 Activate this if your residential area is subject to DST.
Auto : Activates daylight saving time.
Off : Cancels.
Beep Adjust the volume of the key-touch tone.
Off, 1 to 10; Initial 5
Startup Message Edit the voice message at startup/shutdown of the unit.
• To edit the message, press [Edit], enter the message, then press [OK].
You can listen to the edited message by pressing [Test].
– For entering the characters,
☞ page 11.
Shutdown Message
Startup Screen Select the startup screen when the power is turned on.
Restore Factory Default Initialize all settings you have made. Press [Restore] to initialize the
settings.
• When restoring the settings, adjust the settings on installation setting
screen (
☞ page 9).
* 1 Not selectable when the input is selected as the source.
* 2 The setting varies depending on the installation settings (
☞ page 9).
AV menu items
EN_KW-NT3[J]f.indb 71 EN_KW-NT3[J]f.indb 71 10.4.2 0:57:44 PM 10.4.2 0:57:44 PM