JVC UX-F70MD - Manual (Page 29)

– 24 –
English
Basic MD Operations
While playing an MD, you can do the following operations.
To stop playback for a moment
Press MD
3 / 8.
The elapsed playing time start flashing on the display.
To resume playback, press MD
3 / 8 again.
To locate a particular point in a track during play
Press and hold ¢ or 4.
•
¢ : Fast-forwards the tracks.
•
4 : Fast-reverses the tracks.
To go to another track
Press
¢ or 4 repeatedly.
•
¢ : Skips to the beginning of the next or succeeding
tracks.
•
4 : Goes back to the beginning of the current or
previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you to start playing
the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
To change the informations on the display
On the remote control ONLY:
Press DISPLAY/CHARA.
• Each time you press the button, the informations on the
loaded MD change as follows:
7 When playing or pausing:
Normal source playing indication
= Group title and play mode
= Remaining recording time
= Clock time = (back to the beginning)
7 When the MD recorder stops:
Normal source indication
= Remaining recording time
= Clock time = (back to the beginning)
Programing the Playing Order of the Tracks
— Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
On the remote control ONLY:
1
Insert an MD.
2
Press MD
3 / 8, then 7.
The source is changed to “MD.”
3
Press PLAY MODE repeatedly until “PROGRAM”
appears on the display.
• Each time you press the button, play mode changes
as follows:
4
Press the number buttons to select the tracks.
• For how to use the number buttons, see “To go to
another track directly using the number buttons” to
the left.
5
Press MD
3 / 8.
The tracks are played in the order you have programed.
Program play ends when all the tracks are played once.
To stop during play, press
7.
To exit from Program play mode, press PLAY MODE
repeatedly so that the unit enters another playback mode
before or after play.
The current track
Program No.
Play mode
MD indicator
Total playing time
PROGRAM RANDOM
Normal play GROUP
(Program play) (Random play)
(Group play)
Continued
EN22-28UX-F70MD[UB]_f 01.7.10, 3:00 PM 24