JVC UX-F70MD - Manual (Page 44)

– 39 –
English
Recording CD onto an MD and a Tape
— CD Synchronized Recording
You have six methods (MODE 10/15 – 15/15) to record a
CD onto an MD and a tape at the same time.
Using these synchronized recording methods, you can start
and stop CD play, MD and tape recordings at the same
time.
As for MODE 1/15 to 7/15, see page 32.
As for MODE 8/15 and 9/15, see page 37.
On the main unit ONLY:
1
Insert a recordable MD into the MD loading slot
and a recordable cassette into the cassette holder.
2
Prepare a CD.
• After placing a CD, press CD
3 / 8, then 7 before
going to the next step.
• You can make a program (see page 19) or select
Random play mode (see page 20) if you want.
3
Press MODE select to select a recording mode
(MODE 10/15 – MODE 15/15) you want.
4
Press REC start.
CD play and the recording start.
After the recording, the CD, MD recorder and the
cassette deck stop automatically.
To stop recording, press
7.
“UTOCwriting” appears on the display for a while.
MODE 10/15 NORMAL SPEED REC SP
MODE 11/15 NORMAL SPEED REC SP
MODE 12/15 NORMAL SPEED REC LP2
MODE 13/15 NORMAL SPEED REC LP2
MODE 14/15 NORMAL SPEED REC LP4
MODE 15/15 NORMAL SPEED REC LP4
Recording
length mode
Recording
Speed
Recording
mode
Reverse
Mode
To record a single track during play or pause
While playing back or pausing a CD track you want to
record, perform steps 3 and 4.
The playback of that CD track is stopped, and the same track
starts playing from the beginning again. This time, the MD
recorder and cassette deck start recording the CD track.
• After the track is recorded, all the CD player, the MD
recorder and cassette deck stop automatically.
To check the remaining time while recording CD
onto an MD and a tape
On the remote control ONLY:
Press DISPLAY/CHARA.
• Each time you press the button, the recording
indications, remaining time of the MD, the current track
number of the CD and the MD, and clock time appear in
sequence.
Ex.: When recording with MODE 10/15
EN29-39UX-F70MD[UB]_f 01.7.10, 3:00 PM 39