JVC UX-F70MD - Manual (Page 56)

– 51 –
English
DISC TITLE? MOVE ?
ERASE?
DIVIDE ? JOIN ?
ALL ERASE? Canceled
3
Press SET.
• During playback:
The current track number starts flashing.
4
Press
¢ or 4 to select the two adjacent tracks
you want to join.
• You can select the track using number buttons. In this
case, the selected track starts playback repeatedly.
• During playback:
The selected track starts playback repeatedly.
5
Press SET.
“<JOIN>” appears on the display.
• To cancel the setting, press CANCEL, then repeat
step 4.
6
Press ENTER to finish the editing procedure.
“EDITING” then “UTOCwriting” appears on the
display while the editing you have made is being
recorded on the MD.
To divide the joined tracks, see the DIVIDE function on
page 50.
If “CANNOT JOIN” appears in step 5
You cannot join the following tracks.
• Tracks recorded using different recording length modes (SP,
LP2, LP4) (see page 31.)
• Digital-recording tracks and analog-recording tracks.
• Tracks recorded using monaural long recording method (not
possible on this unit) and stereo-recording tracks.
When the tracks belongs to a group
If the preceding track of two tracks you want to join belongs to a
group, the newly joined track will belong to the same group;
Otherwise, the joined track will not belong to any groups.
Moving a Track — MOVE
This function allows you to move a track to the position you
prefer. It is useful to change the order of the tracks as you like.
Once a track is moved, the tracks and the other groups are
renumbered.
• To stop any time during editing process, press
MD TITLE INPUT/EDIT.
On the remote control ONLY:
1
Insert an MD to edit.
Ex. When you want to join tracks 1 and 2.
2
Press MD TITLE INPUT/EDIT repeatedly until
“MOVE ?” appears on the display.
The source changes to “MD.”
• Each time you press MD TITLE INPUT/EDIT, the
edit mode changes as follows:
• If you want to stop this editing process, press CANCEL.
3
Press SET.
• During playback:
The current track number starts flashing.
4
Press
¢ or 4 to select a track you want to move.
• You can select the track using number buttons. In this
case, the selected track starts playback repeatedly.
• During playback:
The selected track starts playback repeatedly.
5
Press SET.
• To cancel the setting, press CANCEL, then repeat step 4.
6
Press
¢ or 4 to select the position where you
want to move the track.
• You can select the track using number buttons. In this
case, the selected track starts playback repeatedly.
• During playback:
The selected track starts playback repeatedly.
• To cancel the setting, press CANCEL, then repeat step 4.
7
Press SET.
“<MOVE>” appears on the display.
• To cancel the setting, press CANCEL, then repeat step 4.
8
Press ENTER to finish the editing procedure.
“EDITING” then “UTOCwriting” appears on the
display while the editing you have made is being
recorded on the MD.
Ex. When you want to move track 2.
Ex. When you want to move track 2 to the
position of track 7.
EN48-52UX-F70MD[UB]_f 01.7.10, 5:21 PM 51