JVC HR-XVC24S - Manual (Page 11)

Masterpage:Right-No-Heading
EN
11
Filename [XVC24S_06Index.fm]
Page 11 28 February 2005 9:11 am
On-Screen Display (VCR deck)
If you press ON SCREEN on the Remote when “SUPERIMPOSE” is set to “ON” (
੬
pg. 59), various operational
indicators appear on the TV screen.
For On-screen display for DVD deck, refer to “Using the on-screen bar” (
੬
pg. 47).
A Channel Position Number/Auxiliary Input
Indicator (F-1)
B Day/Clock Display
C Stereo Program Indicator
੬ pg. 33
D SAP Indicator ੬ pg. 33
E Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press REW (3)
or FF (5) from the Stop
mode or perform an Index
Search. (
੬
pg. 28) The
position of “q” in relation to
“B” (beginning) or “E” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
F Audio Mode Display ੬ pg. 30
G Operation Mode Indicators
H Tape Speed (SP/EP)
I “Cassette Loaded” Mark
J Index number
੬ pg. 28
K Tape Remaining Time Indicator ੬ pg. 33
L Counter Display
A
B
D
E
F
G
H
I
J
K
L
C
Beginning End
To recall an indication
A Press ON SCREEN.
● All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the screen.
B Press ON SCREEN again to clear the display.
● The RECORD/PAUSE indication remains on the screen.
XVC24S_01.book Page 11 Monday, February 28, 2005 9:24 AM