JVC HR-XVC24S - Manual (Page 46)

Filename [XVC24S_08DVD.fm]
Masterpage:Left+
46
EN
Page 46 28 February 2005 9:11 am
OPERATIONS ON DVD DECK (cont.)
Sound Effect
Using the Sound Effect function, you can change the sound field.
● This function makes a human voice clearer.
● This function works only for analog audio output.
1 Access the selection menu.
Press SOUND EFFECT during playback.
● The current setting appears on the TV screen.
2 Turn on the Sound Effect function.
Press SOUND EFFECT to turn on the function.
● Each time you press SOUND EFFECT, the Sound Effect
function turns on and off:
SOUND EFFECT:ON O SOUND EFFECT:OFF
● The selection menu disappears if no operation is done for
about several seconds.
NOTES:
● The Sound Effect function works correctly only for a DVD
VIDEO disc recorded in the 5.1-channel audio format.
● You may not feel the effect of this function well depending on
the source recorded on the disc.
VFP function
— Adjusting the picture quality
The VFP (Video Fine Processor) function enables you to adjust
the picture character according to the type of programing,
picture tone or personal preference.
1 Access the VFP setting menu.
2 Select the VFP mode.
Press w e repeatedly.
● Each time you press w e, the VFP mode changes as follows:
NORMAL]CINEMA]USER 1]USER 2](Back to the
beginning)
To adjust picture appearance manually
● Only “USER 1” or “USER 2” settings can be customized .
3 Access USER menu.
Press w e repeatedly to select “USER 1” or “USER 2.”
4 Select the parameter.
Press rt repeatedly to select a parameter you want to
adjust, then press ENTER.
● Adjust gradually and confirm picture appearance results are as
preferred.
● VFP menu disappears and the following pop-up window
appears on the TV screen.
5 Adjust the parameter.
Press rt repeatedly to change the setting, then press
ENTER.
● The current VFP settings appear again.
Repeat steps 4 and 5 to adjust other parameters.
To return to the normal screen
Press DVD PICTURE.
NOTE:
The VFP setting screen disappears if no operation is done for
more than about 10 seconds.
Press DVD PICTURE during
playback.
● The current setting appears on
the TV screen.
DVD PICTURE SOUND EFFECT
ENTER
Slide to the
right.
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
+3
NORMAL : Select this normally.
CINEMA : Suitable for movie.
USER 1 /
USER 2 :
You can adjust parameters that affect picture
appearance and store settings. Go to step 3.
GAMMA
(–3 to +3):
Adjust this if the neutral color is bright or dark.
The brightness of dark and bright portions is
maintained.
BRIGHTNESS
(–8 to +8):
Adjust this if the picture is bright or dark on
the whole.
CONTRAST
(–7 to +7):
Adjust this if the objects in far and near
positions look unnatural.
SATURATION
(–7 to +7):
Adjust this if the picture is whitish or blackish.
TINT
(–7 to +7):
Adjust this if the appearance of flesh tone is
unnatural.
SHARPNESS
(–8 to +8):
Adjust this if the picture is indistinct.
0 GAMMA
0 GAMMA
XVC24S_01.book Page 46 Monday, February 28, 2005 9:24 AM