JVC HR-XVC24S - Manual (Page 61)

Masterpage:Right-No-Heading
EN
61
Filename [XVC24S_10Subsidiary.fm]
Page 61 28 February 2005 9:11 am
Mode Set
(DVD deck)
You can change various mode settings on the Mode Set
screen by following the procedure described below.
● For each mode setting, see corresponding pages.
● The procedure shows how to set “RESUME” to “ON”
on the DVD Set Up menu screen as an example.
A
Turn on the unit.
Press POWER.
B
Select the DVD deck.
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up on the front display panel.
On the Remote
Press DVD so that the DVD indicator lights up on the
front display panel.
C
Access the DVD Set Up menu screen.
LANGUAGE] PICTURE] AUDIO ] OTHERS
](Back to the beginning)
D
Select the mode.
Press rt to move the hightlight to “RESUME,” then
press ENTER.
E
Select the mode setting.
Press rt to select “ON,” then press ENTER.
F
Return to the normal screen.
Press SET UP.
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch on the Remote to the
right.
LANGUAGE
MENU LANGUAGE (
੬
pg. 20)
AUDIO LANGUAGE (
੬
pg. 20)
SUBTITLE (
੬
pg. 20)
ON SCREEN LANGUAGE (
੬
pg. 19)
PICTURE
MONITOR TYPE (
੬
pg. 17, 62)
PICTURE SOURCE (
੬
pg. 62)
SCREEN SAVER (
੬
pg. 62)
FILE TYPE (
੬
pg. 62)
AUDIO
DIGITAL AUDIO OUTPUT (
੬
pg. 62)
DOWN MIX (
੬
pg. 63)
D. RANGE COMPRESSION (
੬
pg. 63)
OTHERS
RESUME (
੬
pg. 64)
ON SCREEN GUIDE (
੬
pg. 64)
POWER
Slide to the
right.
A Press SET UP.
B Press w e to select
“ OTHERS.”
● Each time you press the
button, the setup menus
change as follows;
ON
OTHERS
RESUME
ON SCREEN GUIDE ON
XVC24S_01.book Page 61 Monday, February 28, 2005 9:24 AM