JVC HR-XVC24S - Manual (Page 53)

Masterpage:Right-No-Heading
EN
53
Filename [XVC24S_09Editing.fm]
Page 53 28 February 2005 9:11 am
Edit To Or From
Another Video
Recorder
You can use your unit as the source player or as the
recording deck.
A
Make connections.
A When using your unit as the source player ...
... connect its AUDIO/VIDEO OUTPUT connectors to the
audio/video input connectors on another recorder.
B When using your unit as the recording deck ...
... connect its AUDIO/VIDEO input connectors to the
audio/video output connectors on another recorder.
B
Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VHS indicator
lights up on the front display panel.
On the Remote
Press VCR so that the VHS indicator lights up on the front
display panel.
C
Set the input mode of recording deck.
With this video unit, press AUX (number key “0”) and/or
CH +/– to select “F-1.”
● When using another recorder as the recording deck, refer to its
instruction manual.
D
Set the edit mode.
See “PICTURE CONTROL” on page 59.
E
Engage the Record Pause mode of the
recording deck.
Locate the point where you start recording, then engage
the Record Pause mode.
F
Start the source player.
Engage the Play mode of the source player.
G
Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
● All necessary cables can be obtained from your dealer.
● When you select “EDIT” to dub tapes in step D, be sure to select
“NORM” after you finish dubbing the tapes.
● When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting. (
੬
pg. 59)
A
B
AV mode
Audio/video
cable
Recorder
Your unit
Another recorder
Player TV receiver
Audio/video cable
Your unit
Another recorder
Player TV receiver
Recorder
Audio/video
cable
Audio/video cable
AV mode
Slide the TV/VCR/DVD switch on the Remote to the
right.
XVC24S_01.book Page 53 Monday, February 28, 2005 9:24 AM