JVC HR-XV48E - Manual (Page 50)

Filename [XV48EX_EN_09Editing.fm]
Masterpage:Left0
50
EN
Page 50 October 9, 2004 10:34 pm
SYSTEM CONNECTIONS
Connecting to a Satellite
Receiver
Simple Connections
This is an example of a simple connection if your TV has
one 21-pin AV input (SCART) connector.
Connect the satellite receiver to the L-2 IN/DECODER
connector, then connect the L-1 IN/OUT connector to
the TV’s connector.
NOTES:
● Set “L-2 SELECT” to “A/V”. (
੬
pg. 54)
● You can use the Automatic Satellite Programme Recording
function (
੬
pg. 28) with this connection. (VHS deck only)
● To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key “0”) and/or PR so that
“L-2” appears on the front display panel. (VHS deck only)
● For details, refer to the instruction manual of the satellite
receiver.
Perfect Connections
This is an example of recommended connections if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector
if you have a decoder, L-1 IN/OUT connector to TV’s
connector, and L-2 IN/DECODER connector to the
satellite receiver’s connector. Then connect the satellite
receiver and TV.
NOTES:
● Set “L-2 SELECT” to “A/V”. ( ੬
pg. 54)
● You can use the Automatic Satellite Programme Recording
function (
੬
pg. 28) with this connection. (VHS deck only)
● To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key “0”) and/or PR so that
“L-2” appears on the front display panel. (VHS deck only)
● To receive a scrambled broadcast, descramble the signal with
the decoder connected to the satellite receiver.
● For details, refer to the instruction manual of the satellite
receiver and decoder.
IMPORTANT
When you set “L-2 SELECT” to “SAT” (
੬
pg. 54), it is
possible to view a satellite broadcast with the TV set to its AV
mode even if the unit is turned off. When the unit is in Stop
mode or recording, press TV/VCR on the remote control to
turn off the VCR indicator on the front display panel.
● If you turn on the unit when the satellite receiver’s power is
off, nothing appears on the TV screen. In this case, turn on
the satellite receiver, or set the TV to its TV mode, or press
TV/VCR on the remote control to set the unit to the video
mode.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
TV
ANTENNA OUT
ANTENNA IN
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
TV
Decoder
ANTENNA OUT
ANTENNA IN
XV48EX_EN_01.book Page 50 Saturday, October 9, 2004 10:34 PM