Jensen JIPS-290I - Manual (Page 14)

14
Volume level is set too
high.
Decrease the volume.
If the iPad/iPod/iPhone original sound source
is of poor quality, distortion and noise are
easily noticed with high-power speakers. Try a
different audio source such as a music CD.
Sound is distorted.
Sound source is distorted. If you are using an external sound source like
older generation of iPod, try reducing the
output volume on the device itself. Also try
turning bass boost OFF or change the EQ
setting.
Unit gets warm after
extended play at high
volume.
This is normal.
Turn the unit off for a period of time or lower
volume.
SPECIFICATIONS
Power Requirement
Main Unit AC-DC Adaptor: Input: AC 120V, 60Hz
Output: DC 10V, 3400 mA
Remote Control 1 X 3V CR2025 Lithium Battery
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory
has been designed to connect speci
fi cally to iPod, iPhone, or iPad, respectively, and has been
certi fi ed by the developer to meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and regulatory standards. Please note
that the use of this accessorywith iPod, iPhone, or iPad may affect wireless performance.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
At Spectra, environmental and social responsibility is a core
value of our business. We are dedicated to continuous
implementation of responsible initiatives with an aim to
conserve and maintain the environment through responsible
recycling.
Please visit us at http://www.spectraintl.com/green.htm for more information on Spectra’s green initiatives or to
find a recycler in your area.