Jensen JIPS-290I - Manual (Page 9)

9
Volume Up( + ) / Down( - ) control
Press the VOLUME Up(+) / Down(-) button on the remote control or main unit to adjust the
volume to desired sound level.
Operating the MUTE function
When listening to an iPad/iPod/iPhone or while using the AUX IN, press the MUTE button on the
remote to activate the mute function, t
he blue rings around the POWER and VOLUME Up/Down
Buttons will begin flashing rapidly. The speaker sound is temporally muted. Press the Mute button
again to cancel the mute function or press the VOLUME+/- button to resume the normal playback
mode.
Mounting the iPad, iPod and iPhone Adjustable Support
The unit comes with an adjustable support for the back of the iPad/iPod/iPhone to rest on
when docked. Attach the adjustable support by sliding it onto the mounting bracket
located behind the 30-pin connector as shown below. Make sure the adjustable support
locks firmly into place before docking ANY iPod, iPad or iPhone to avoid damage the 30
pin connector.
Note: Do not attempt to dock your Apple device onto the unit before this adjustable
support has been securely attached. It may damage the 30-pin connector of the
unit and
such damage is not covered by your warranty.
CAUTION
The Adjustable Support for the iPad, iPod and iPhone is not designed to be removed
once it’s installed.