JVC VS-DT88V - Manual (Page 15)

12
Englis
h
Basic Operations
Turning the Power On and Off
Turning the System On
Press the
% button.
The display comes on and “HELLO” appears once. The op-
eration indicators appear on the Panel. (The Panel opens au-
tomatically if the Unit is placed vertically and the DISP.SET
switch on the rear of the Unit is set to “V”.)
The System comes on ready to continue in the mode it was
in when the power was last turned off.
■ For example, if the last thing you were doing was listen-
ing to a CD, you are now ready to listen to a CD again. If
you wish, you can change to another source.
■ If you were listening to the Tuner last, the Tuner comes
on playing the station it was last set to.
Turning the System Off
Press the
% button again.
The Panel closes if it has been opened.
“GOOD BYE” appears and the display goes out, except for
the clock display. The
% indicator (red) remains lit and the
rest of the operation indicators go out.
■ Some power is always consumed even though power is
turned off (called Standby mode).
■ To switch off the System completely, unplug the AC
power cord from the wall outlet. When you unplug the
AC power cord, the clock will be reset to 0:00 after about
20 minutes.
Adjusting the Brightness
(DIMMER)
(Using the Remote Control)
You can adjust the brightness of the backlighting for the dis-
play and the illumination on the cover.
When the System is Turned On
Each time you press the DIMMER button, the brightness of
the backlighting and the illumination on the cover change as
follows:
• When the System is turned off once, then turned on again,
the brightness setting will be restored to the previous one
since the setting is stored in memory.
SOURCE VOL PREV. NEXT RETURN SELECT
COMPACT COMPONENT SYSTEM
VOL +/–
STANDBY/ON
FM/AM
MD/AUX
CANCEL MPX
SET
SLEEP DIMMER
DISPLAY
REPEAT
VIDEO
INTRO HIGH LIGHT RETURN STILL
COLOR
CLOCK /TIMER
OPEN /CLOSE
VOLUME
PBC
1 2 3
6
9
+10 10
7
4 5
8
ON SCREEN
TREBLE BASS AHB PRO
PREV. CD SELECT NEXT
FM MODE PLAY MODE
VCD No. VCD No.
VOLUME +/–
DIMMER
COLOR
AHB PRO
DISPLAY
BASS
TREBLE
%
indicator
Panel
Illumination
(VS-DT88V
only)
Operation indicators
Power Save Mode
You can reduce the power consumption in Standby
mode.
Press the DISPLAY button on the Remote Control when
the System is turned off.
• The clock display goes out.
CD-in indicator
While a disc is loaded in the Unit, the CD-in indicator
appears on the display.
• The CD-in indicator appears while using the Tuner or
external equipment and does not appear during CD
operations.
Display Backlighting Illumination
DIMMER OFF Bright Bright
DIMMER 1 Slightly Dark Slightly Dark
DIMMER 2 Dark Off
VS-DT68V-88V[UF]_EN.book Page 12 Wednesday, June 26, 2002 3:31 PM