JVC VS-DT88V - Manual (Page 22)

19
Using the CD Player
Englis
h
The Quickest Way to Start a CD is with the One
Touch Operation
■ Press the CD SELECT 3¥8 button on the Remote Con-
trol.
• The power is automatically turned on. If a CD is
already inserted, it will start playing from the first
track.
• If no CD is inserted, “CD NO DISC” appears on the
display and the CD Player remains in Stop mode.
To Insert a CD
1 Press the
% button.
(When the Unit is placed vertically)
The Panel opens automatically.
(When the Unit is placed horizontally)
To open the Panel, press the
0 button on the Unit or the
OPEN/CLOSE button on the Remote Control.
2 Insert a CD into the loading slot, with its
label side front or up as shown below.
■ An 8 cm CD cannot be played back in this Unit. (Do not
attempt to insert an 8 cm CD using an adapter. Doing so
will damage the Unit.)
■ If the CD cannot be read correctly (because it is scratched
or loaded upside down, for example), “CANNOT PLAY”
appears on the display.
■ You can insert a CD while listening to the other source.
CAUTIONS:
• DO NOT try to open or close the Panel by
hands as it will be damaged. Press the
OPEN/CLOSE button on the Remote Con-
trol to open or close the Panel.
• DO NOT try to insert another CD when a CD
has been already loaded in the Unit. Doing
so will damage the CDs and the Unit.
• DO NOT apply any shock to the Panel when
it is open.
• DO NOT clean the Panel when it is open.
To Unload a CD
(Using the Unit)
Press the
0 button to unload a CD. The CD is unloaded
automatically, then take out the CD.
Basics of Using the CD Player
— Normal Play
To Play Audio CDs or Video CDs
• The display explained here is for digital audio CDs.
When a video CD is played, “VCD” will appear instead
of “CD”.
1 Insert a CD.
2 Press the CD SELECT
3/8 button on the
Remote Control (or the SELECT
3/8
button on the Unit).
The first track of the CD begins playing.
• The CD Player automatically stops when the last
track of the CD has finished playing.
To stop playing the CD, press the 7 button.
The following information for the CD appears.
To stop playing and remove the CD, press the 0 but-
ton on the Unit.
To pause, press the CD SELECT 3¥8 button on the Re-
mote Control or the SELECT
3¥8 button on the Unit. The
playback time blinks on the display.
To cancel pause, press the same button again. Play con-
tinues from the point where it was paused.
COMPACT COMPONENT SYSTEM
SOURCE VOL PREV.
COMP A CT COMPONENT SYSTEM
SOURCE PRESET VOL
Label side (when the Unit
is placed vertically)
Label side (when the Unit
is placed horizontally)
COMPACT COMPONENT SYSTEM
SOURCE VOL PREV.
COMP A CT COMPONENT SYSTEM
SOURCE PRESET VOL
(when the Unit is placed
vertically)
(when the Unit is placed
horizontally)
Track number Playback time
Total track number Total playback time
VS-DT68V-88V[UF]_EN.book Page 19 Wednesday, June 26, 2002 3:31 PM