JVC VS-DT88V - Manual (Page 30)

27
Englis
h
Using the Timers
The timers let you control listening functions automatically.
Setting the Clock
(Using the Remote Control)
• When you plug the AC power cord into the wall outlet,
the time indication “0:00” blinks on the display.
• The clock must be correctly set for the timers to work.
1 Press the
% % % % button.
2 Press the CLOCK/TIMER button.
The hour digit of the time indication rapidly blinks on
the display.
3 Press the NEXT
¢ or 4 PREV. button
to set the hour.
Pressing the NEXT
¢ button moves the time forwards
and pressing the
4 PREV. button moves it backwards.
Press and hold the button to move the time rapidly.
4 Press the SET button.
The minute digits of the time indication rapidly blink on
the display.
5 Press the NEXT
¢ or 4 PREV. button
to set the minute.
6 Press the SET button.
The selected time is set and the seconds start counting
from 0.
CAUTION:
• If there is a power failure, the clock loses its
setting after about 20 minutes. “0:00” blinks
on the display and the clock must be reset.
• The clock may gain or lose one to two minutes per month.
• The
or button operates the same as the
4
PREV.
or NEXT
¢
button does.
SLEEP
STANDBY/ON
FM/AM
MD/AUX
CANCEL MPX
SET
SLEEP DIMMER
DISPLAY
REPEAT
VIDEO
INTRO HIGH LIGHT RETURN STILL
COLOR
CLOCK /TIMER
OPEN /CLOSE
VOLUME
PBC
1 2 3
6
9
+10 10
7
4 5
8
VCD No. VCD No.
ON SCREEN
TREBLE BASS AHB PRO
PREV. CD SELECT NEXT
FM MODE PLAY MODE
SET
CLOCK
/TIMER SLEEP
NEXT PREV. Timer indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
SLEEP indicator
ON time, OFF time, Source, Volume
CLOCK
/TIMER PREV. NEXT
CLOCK
/TIMER
VS-DT68V-88V[UF]_EN.book Page 27 Wednesday, June 26, 2002 3:31 PM