Jwin JX-R86 User Manual

Page 11

Advertising
background image

c. Press the REP key to repeat the interval from the end of the last repeating

interval to the new point at which you press the REP key again.

d. Press the REC/STOP key to stop replaying the message.

19. HOW TO USE THE BOOKMARK FUNCTION

a. Under the stop or standby mode, press the FOL key to continue to play a

recorded message from the end of the last repeating interval. (It will only work if

you tried the repeating function at least once before using this function.)

b. Press the FOL key to set the bookmark and to reset the beginning of the repeat

interval while under the replaying mode. (When you set the bookmark, you will

see the “INt” indication on the LCD display. This bookmark will be used to

continue to play a message from the bookmarked point when you press the FOL

key in the stop mode next time.)

20. HOW TO USE THE COMPARISON FUNCTION

a. Under the repeat mode, press the FOL key to record your comparison voice.

(This recorded voice is used to compare the repeating interval of the original

recorded message, and it will be saved in the memory temperately. If you end

the comparison, it will automatically be erased.)

b. Press the FOL key to finish the comparison voice recording and to hear it.

c. Press the REP key to hear the original message. You could compare them by

pressing the FOL key and REP key repeatedly.

21. ADDITIONAL FUNCTIONS

a. To lock the keys, press and hold both VOL + and VOL – keys simultaneously in

the stop or standby mode. You will see the lock indication on the LCD display.

When this is activated, any key on the case will not work at all. To unlock them,

press and hold both VOL + and VOL – keys simultaneously.

b. Battery power reminder: When the battery power is insufficient, the recorder will

make ticking sounds and simultaneously display a lower battery indication on the

Advertising