Jwin JX-R86 User Manual
Page 9
d. Use the VOL + or VOL – key to change the year.
e. Press the PLAY/OK key to confirm the chosen year. After pressing the key, the
next position for month will be flickering automatically.
f.
Use the VOL + or VOL – key to change the month.
g. Press the PLAY/OK key to confirm the chosen month. After pressing the key, the
next position for the day will be flickering automatically.
h. Repeat the steps above until you set the minute. After you press the PLAY/OK
key to confirm the chosen minute, the LCD display will show the “SEt tIME” menu
automatically.
i.
Press the REC/STOP key to exit the setup mode.
Note:
This unit only displays time in 24hr mode.
16. HOW TO SET THE ALARM FUNCTION
a. Press and hold the PLAY/OK key for about 2 seconds to enter the setup mode.
b. Use the VOL + or VOL – key to locate the “SAY HELLO” menu.
c. Press the PLAY/OK key to enter the “SAY HELLO” setup page. You will see the
blinking position and steady number positions on the LCD display. The positions
are in order of Hour-Minute respectively.
d. Use the VOL + or VOL – key to change the hour.
e. Press the PLAY/OK key to confirm the chosen hour. After pressing the key, the
next position for minute will be flickering automatically.
f.
Use the VOL + or VOL – key to change the minute.
g. Press the PLAY/OK key to confirm the chosen minute. After pressing the key, it
will go to the “SAY ON/OFF” setup page automatically.
h. Use the VOL + or VOL – key to select the “ON” or “OFF” option. Choose the
“ON” option if you want to turn on the alarm function. Choose the “OFF” option if
you want to turn off the alarm function.
i.
Press the PLAY/OK key to confirm your choice. The LCD display will show the
“SAY HELLO” setup menu and the alarm indicator if you turn on the alarm
function.
j.
Press the REC/STOP key to exit the setup mode.
Note: