Jwin JX-R86 - Manual (Page 8)

you can still find the message numbered as 3 in the directory. However, the message
is not the one which you just deleted. It is the one which was numbered as 4
previously. In other words, it will reduce all the message numbers by 1 after the
deleted one.
14. HOW TO DELETE ALL THE RECORDED MESSAGES
a. Press and hold the PLAY/OK key for about 2 seconds to enter the setup mode.
b. Use the VOL + or VOL – key to locate the “dEL ALL” menu.
c. Press the PLAY/OK key to enter the “dEL ALL” setup page.
d. Use the VOL + or VOL – key to select the “dEL dir” or “dEL FLASH” option.
Select the “dEL dir” option to erase all the messages in the current directory or
select the “dEL FLASH” option to erase all the recorded messages in the whole
memory.
e. Press the PLAY/OK key to confirm your choice. The LCD will show the “dEL ALL”
menu automatically after deleting all the messages in the directory or in the
whole memory.
f. Press the REC/STOP key to exit the setup mode.
Note:
Please ensure whether or not the recorder is in the right directory when you are trying
to delete all the messages in a certain directory. If you enter the setup mode in the
“a” directory and choose the “dEL dir” option to delete all the messages in the “b”
directory, it will not erase the messages in the “b” directory. It rather erases all the
recorded messages in the “a” directory. If you want to delete all the recorded
messages in the “b” directory, you must change from the “a” directory to the “b”
directory, and then call the setup mode to delete all the messages in the “b” directory.
15. HOW TO SET TIME AND DATE
a. Press and hold the PLAY/OK key for about 2 seconds to enter the setup mode.
b. Use the VOL + or VOL – key to locate the “SEt tIME” menu.
c. Press the PLAY/OK key to enter the “SEt tIME” setup page. You will see the
blinking position and steady number positions on the LCD display. The positions
are in order of Year-Month-Day-Hour-Minute respectively.