Jwin JX-R86 - Manual (Page 6)

Note:
The directories are used to separate recorded files. For example, if you record a
message in the directory “b”, that particular message can only be reproduced from
directory “b”.
9. HOW TO PLAY PREVIOUSLY RECORDED MESSAGE
a. Turn on the recorder.
b. Switch to the directory which contains a recorded message you want to play.
c. Use the VOL + or VOL – key to select the message. The file number and
recording time for each message will be displayed on LCD while browsing the
messages in the directory.
d. Select the message and press the PLAY/OK key to play it.
e. Press the PLAY/OK key if you want to pause.
f. Press the VOL + or VOL – key if you want to adjust the volume level.
g. Press and hold the VOL + or VOL – key if you want to search the content of the
recorded file forward or backward in fast speed.
h. Press the REC/STOP key if you want to stop playing the message.
10. HOW TO RECORD WITH OTHER DEVICES (CD/CASSETTE PLAYERS)
a. Adjust the volume control of the source device. At the first try, it is recommended
to set the volume low.
b. Connect one end of the line cable, which is included with the recorder, to the MIC
jack of the recorder.
c. Connect the other end of the line cable to the earphone jack of the source device.
d. Press the REC/STOP key to start recording.
e. Play the source device.
f. Press the REC/STOP key to stop recording.
11. HOW TO RECORD YOUR CONVERSATION FROM A PHONE CALL
a. Connect the telephone connector, which is included with the recorder, to the
telephone jack.