Using sleep timer – JVC UX-L30 User Manual

Page 23

Advertising
background image

– 20 –

• Each time you press these buttons, the timer mode and

the source change as follows:

DAILY

TUNER : tunes in to the last station you were

listening to. (Daily Timer)

REC

TUNER : records the last station you were listening

to. (Recording Timer)
• Put a recordable cassette into the deck.

DAILY

CD : plays a CD. (Daily Timer)

• Load a CD.

DAILY

TAPE : plays a tape. (Daily Timer)

• Make sure that the tape direction is correct.

5

Press UP or DOWN to set the volume level,
then press CLOCK/TIMER.

• You can select the volume level (“VOLUME – –” and

“VOLUME 0” to “VOLUME 40”).
If you select “VOLUME – –,” the volume is set to the
last level when the unit has been turned off.

To turn off the volume while the Recording Timer

(

REC

TUNER) is working, set the volume level

“VOLUME 0.”

The unit enters the clock setting mode.

6

Adjust the clock.

• See “Setting the Clock” on page 9.

7

Press STANDBY/ON

to

turn off the unit (on standby) if
you have set the timer with the
unit turned on.

• When the timer turns on the unit,

(timer) indicator and the selected timer
mode indicator (DAILY or REC) start
flashing.

To cancel the setting, press and hold CLOCK/TIMER until

(timer) indicator goes off from the display.

• If the unit is turned on when the timer-on time comes

Timer does not work.

• When you unplug the AC power cord or if a power failure

occurs
The timer will be canceled. You need to set the clock first, then
the timer again.

Using Sleep Timer

With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.

How Sleep Timer actually works

The unit automatically turns off after the specified time
length passes.

On the remote control ONLY:

1

Press SLEEP.

The time length until the shut-off time appears
and the SLEEP indicator lights up on the
display.
• Each time you press the button, the time length changes

as follows:

2

Wait for about 5 seconds after specifying the
time length.

To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.

To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.

To cancel the setting, press SLEEP repeatedly until the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.

• If you set the Sleep Timer after Daily Timer starts playing the

selected source
Daily Timer is canceled.

• If you set the Sleep Timer after Recording Timer starts

recording
Recording Timer is canceled, but recording continues until Sleep
Timer shuts off the power.

SLEEP

SLEEP 10

Canceled

SLEEP 20

SLEEP 30

SLEEP 60

SLEEP 90

SLEEP120

CD

TAPE

TUNER

TUNER

DAILY

REC

DAILY

DAILY

UP

DOWN

CLOCK
/TIMER

UP

DOWN

CLOCK/TIMER

STANDBY/ON

STANDBY / ON

EN17-22_UX-L30[A]f

02.3.4, 9:09 PM

20

Advertising