Connecting other equipment – JVC CA-MXDVA5 User Manual

Page 13

Advertising
background image

– 8 –

English

DIGITAL OUT

OPTICAL

[ ]

For playing the other equipment through this unit,
connect between the audio output jacks on the other
equipment and the AUX IN jacks by using an audio cord (not
supplied).

To audio output

To connect audio equipment with an optical digital
input terminal — such as digital decoder

You can connect a digital decoder or MD recorder by using
an optical digital cord (not supplied).
• See “About sounds reproduced through the rear terminals”

below.

To optical
digital input

Before connecting
the other equipment,
remove the
protective plug from
the terminal.

Audio equipment
with an optical digital
input

Protective
plug

AUX IN

Audio equipment

Connecting Other Equipment

You can connect both analog and digital equipment.

• DO NOT connect any equipment while the power

is on.

• DO NOT plug in any equipment until all

connections are complete.

To connect analog components

Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.

LINE OUT

Audio equipment

About sounds reproduced through the rear
terminals

Through the LINE OUT (L/R) jacks and MAIN

SPEAKERS/SUBWOOFER terminals:
Analog stereo signals are output.
When playing a source encoded with Dolby Digital*
(

) or with MPEG Multichannel, multichannel

signals are mixed to the left and right front channel
signals, then output.

– You cannot reproduce the sound encoded DTS Digital

Surround** (

).

Through the DIGITAL OUT (OPTICAL) terminal:

Digital signals (Linear PCM, Dolby Digital, DTS
Digital Surround, MPEG Multichannel) are output
through this terminal.
To reproduce the multichannel sounds such as Dolby
Digital, MPEG Multichannel, and DTS Digital
Surround, connect an amplifier or a decoder compatible
with these multichannel sources to this terminal, and set
“DIGITAL OUTPUT” and “DTS” settings correctly.
(See page 31.)

*

Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential Unpublished Works. ©1992–1997
Dolby Laboratories. All rights reserved.

** Manufactured under license from Digital Theater Systems,

Inc. US Pat. No. 5,451,942 and other world-wide patents
issued and pending. “DTS” is a registered trademark of
Digital Theater Systems, Inc. Copyright 1996, 2000 Digital
Theater Systems, Inc. All Rights Reserved.

For recording sounds through this unit on the other
equipment,
connect between the audio input jacks on the
other equipment and the LINE OUT jacks by using an audio
cord (not supplied).
• See “About sounds reproduced through the rear terminals”

on the right column.

To audio input

Continued

EN01-13.CA-MXDVA5[UG]_f

01.3.23, 1:42 PM

8

Advertising