JVC CA-MXDVA5 - Manual (Page 28)

– 23 –
English
5
Repeat steps 4 to program
other tracks you want.
After 20 tracks are programed,
“CLEAR LAST TRACK” is selected.
• If you want to play back the
programed tracks, go to step 6.
• If you want to modify the program, see
below.
6
Press DVD
6.
The tracks are played in the order you have
programed.
To stop during play, press
7.
• If you are playing back a VCD or CD, this unit can
memorize the end point even when you turn off the unit,
and when you start playback again by pressing DVD
6,
playback begins from where it has been stopped. (Resume
play)
• To stop completely, press
7 twice.
To exit from Program play mode while setting the
program, press PLAY MODE or RETURN. (The program
you have made is also erased.)
• To exit from Program play mode during or after play, press
CLEAR.
• Ejecting a carrousel will also erase the stored memory.
To modify the program
Before playing, you can modify the program.
To erase the last track: press Cursor
∞ to select (highlight)
“CLEAR LAST TRACK,” then press ENTER.
• Each time you press ENTER, the last programmed track is
erased from the program.
To erase all the programed tracks: press Cursor ∞ to select
(highlight) “CLEAR ALL TRACKS,” then press ENTER.
To add tracks in the program before play, simply select the
track numbers you want to add by following step 4.
To check the programed contents
After playing, you can check the programed contents by
pressing PLAY MODE. The programed contents appear on
the TV screen.
If your entry is ignored
You have tried to program a track number that does not exist on the
disc. Such entries are ignored.
TRACKS PROGRAM ORDER
ENTER RETURN
21 22 23 24
25 26 27 28
29 30 31 32
33 34 35 36
37 38 39 30 10 30 – – – –
– – – – – – – –
– – – – – – – –
– – – – – – – –
– – – – – – – –
CLEAR LAST TRACK
CLEAR ALL TRACKS
PRESS
PLAY TO START
Ex.: when selecting track number 30.
Appears when
you can go
back to the
previous page
(track number
list).
PROGRAM RANDOM
ENTER RETURN
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
17 18 19 20 – – – – – – – –
– – – – – – – –
– – – – – – – –
– – – – – – – –
– – – – – – – –
Playing at Random — Random Play
The tracks of the selected disc will play at random.
• Random play cannot be used on a DVD.
• To use Repeat play for Random play, press REPEAT after
starting Random play.
On the remote control ONLY:
1
Load a disc.
• If the current playing source is not the DVD player,
press DVD1, DVD2 or DVD3 on the unit to select the
disc you want to play, then
7 before going to the next
step.
2
Press PLAY MODE.
The following screen appears on the TV.
• Make sure that “RANDOM” on the TV screen is
highlighted. If “PROGRAM” is highlighted, press
Cursor
3 to highlight “RANDOM.”
The RANDOM indicator also lights up on the display.
To cancel Random play mode, press PLAY MODE or
RETURN.
3
Press ENTER (or DVD
6).
The tracks are played at random. Random play
ends when all tracks are played once.
To stop during play, press
7.
• Random play also stops when
0 is pressed.
To exit from Random play mode when finished, press
CLEAR.
If you press ¢ or 4
Skips to the next track selected randomly.
You can cancel the program after play by pressing
following buttons:
1. DISC CHANGE, Disc number buttons (DVD1, DVD2, DVD3),
0 or 7 (twice) on the unit, or
2. CLEAR on the remote control.
EN21-27.CA-MXDVA5[UG]_f 01.3.23, 1:43 PM 23