JVC CA-MXDVA5 - Manual (Page 30)

– 25 –
English
When a DVD is playing:
When a VCD is playing:
2x Zoom 4x Zoom
Canceled
2x Zoom Canceled
Zoom
You can zoom up a particular portion of the picture while
playing a DVD and VCD.
On the remote control ONLY:
1
Press ZOOM.
The zoom scope appears on the center of the TV
screen.
2
Press Cursor (
2, 3, 5, ∞) to
move the zoom scope to the
portion you want to zoom in.
3
Press ENTER to zoom into the portion
selected in the above step.
• Each time you press the button, the picture is
enlarged as follows:
Normal play
1/8 1/4 1/2
Normal play
1/8 1/4 1/2
TUNING
Zoom scope
Still Picture/Frame-by-frame Playback
You can advance the still picture frame by frame while
playing back a DVD or a VCD.
On the remote control ONLY:
1
Press STILL once during play.
A still picture appears on the screen.
2
Press STILL repeatedly to advance the
picture frame by frame.
• Each time you press the button, the picture
advances frame by frame.
To resume normal play
Press DVD
6.
If the picture shakes or small letters cannot be clearly
shown during still picture playback
Change “STILL MODE” setting using the Setup menu (see page 34).
Slow Motion Playback
You can enjoy slow motion playback while playing a DVD or
VCD.
• Reverse slow motion playback is only possible on a DVD.
1
Press DVD
6 (or STILL) once
during play.
A still picture appears on the screen.
2
Press
¡ (or 1) repeatedly to
start slow-motion playback
• Each time you press ¡, slow motion
speed changes as follows:
• Each time you press 1, reverse slow motion speed
changes as follows (only possible on a DVD):
Special Effects Playback
EN21-27.CA-MXDVA5[UG]_f 01.3.23, 1:43 PM 25